Fujitsu MHT2080BH, MHT2060BH, MHT2040BH manual Installation Conditions, Theory of Device Operation

Contents

	2.2.1	SATA interface	2-3
	2.2.2	Drive connection	2-3
CHAPTER 3	Installation Conditions		3-1
	3.1	Dimensions	3-2
	3.2	Mounting	3-3
	3.3 Connections with Host System		3-9
	3.3.1	Device connector	3-9
	3.3.2 Signal segment and power supply segment		3-10
	3.3.3 Connector specifications for host system		3-10
	3.3.4 SATA interface cable connection		3-11
	3.3.5 Note about SATA interface cable connection		3-11
CHAPTER 4 Theory of Device Operation			4-1
	4.1	Outline	4-2
	4.2	Subassemblies	4-2
	4.2.1	Disk	4-2
	4.2.2	Spindle	4-2
	4.2.3	Actuator	4-2
	4.2.4	Air filter	4-3
	4.3	Circuit Configuration	4-3
	4.4	Power-on Sequence	4-6
	4.5	Self-calibration	4-7
	4.5.1	Self-calibration contents	4-7
	4.5.2 Execution timing of self-calibration		4-8
	4.5.3 Command processing during self-calibration		4-8
	4.6	Read/write Circuit	4-9
	4.6.1	Read/write preamplifier (PreAMP)	4-9
	4.6.2	Write circuit	4-9
	4.6.3	Read circuit	4-10

x C141-E203-01EN