Manuals / Fujitsu / Computer Equipment / Computer Drive

Fujitsu MHT2080BH, MHT2060BH Write Sector S EXT X’34’ Description, Error reporting conditions

Models: MHT2080BH MHT2060BH MHT2040BH

1 264

Download 264 pages 35.52 Kb

Page 200

Interface

(44) WRITE SECTOR (S) EXT (X’34’)

•Description

This command is the extended command of the WRITE SECTOR (S) command. The LBA specification is increased from 28 bits to 48 bits, and the maximum number of sectors that can be transferred by a single command is changed from 100h to 10000h. Other command controls are the same as those of the WRITE SECTOR (S) command.

•Error reporting conditions

(1)The command was issued in CHS mode (ST = 51h, ER = 04h).

The other error reporting conditions are the same as those of the WRITE SECTOR(S) command.

At command issuance (Shadow Block Registers setting contents)

CM	0	0	1	1		0	1	0	0

DH	1	L	1		x			xx

CH EXP					LBA (47-40)
CH					LBA (23-16)
CL EXP					LBA (39-32)
CL					LBA (15-8)
SN EXP					LBA (31-24)
SN					LBA (7-0)
SC EXP				Sector count (15-8)
SC				Sector count (7-0)
FR EXP						xx
FR						xx

At command completion (Shadow Block Registers contents to be read)

ST				Status information

DH	1	L	1		x		xx

CH EXP				LBA (47-40)
CH				LBA (23-16)
CL EXP				LBA (39-32)
CL				LBA (15-8)
SN EXP				LBA (31-24)
SN				LBA (7-0)
SC EXP					xx
SC					xx
ER				Error information

5-126

C141-E203-01EN

Image 200

Fujitsu MHT2080BH, MHT2060BH, MHT2040BH manual Write Sector S EXT X’34’ Description, Error reporting conditions

Contents

MHT2080BH, MHT2060BH, MHT2040BH Disk Drives Product ManualFor Safe Operation Handling of This ManualRevision History This page is intentionally left blank Preface Overview of ManualConventions Conventions for Alert MessagesOperating Environment Liability Exception This page is intentionally left blank Important Alert Items Important Alert MessagesThis page is intentionally left blank MHT2040BH Disk Drives Product Manual MHT2040BH Disk Drives Maintenance ManualManual Organization This page is intentionally left blank Contents Installation Conditions Theory of Device OperationInterface 102 Operations IN-1 GL-1Acronyms and Abbreviations AB-1 Illustrations FiguresResponse to power-on when the host is powered Recommended connector specifications for the host system TablesRelationship between combination of Identifier and Security Device Overview Adaptability FeaturesFunctions and performance Interface Device Specifications Specifications summarySpecifications 1/2 MHT2080BH MHT2060BH MHT2040BHSpecifications 2/2 Model and product numberMHT2080BH Examples of model names and product numbersRipple Power RequirementsInput Voltage Current Requirements and Power Dissipation Current and power dissipationEnvironmental Specifications Current fluctuation Typ. at +5 V when power is turned onPower on/off sequence Environmental specificationsAcoustic noise specification Shock and vibration specificationAcoustic Noise Shock and VibrationService life Data assurance in the event of power failureReliability Mean time between failures MtbfError Rate Unrecoverable read errorPositioning error Media DefectsAdvanced Power Management Advanced power management Device-initiated Interface Power Management Dipm Interface Power Management IPMHost-initiated Interface Power Management Hipm Interface power management This page is intentionally left blank Device Configuration Device Configuration System Configuration Sata interfaceDrive connection Read/write circuitThis page is intentionally left blank Installation Conditions Dimensions DimensionsOrientation MountingIntegration Guidance C141-E144 PCA FrameLimitation of mounting Location of breather Ambient temperature Service area Handling cautionsHios ESDSumitomo 3M Device connector Connections with Host SystemRecommended connector specifications for the host system Connector specifications for host systemSignal segment and power supply segment Sata interface cable connection This page is intentionally left blank Theory of Device Operation Outline SubassembliesDisk SpindleCircuit Configuration Air filterServo circuit Spindle motor driver circuitPower Supply Configuration PCA Power-on Sequence Power-on operation sequenceSelf-calibration contents Self-calibrationCommand processing during self-calibration Execution timing of self-calibrationRead/write Circuit Read/write preamplifier PreAMPWrite circuit RLL code MeeprmlProgrammable filter circuit Read circuitAGC circuit Digital PLL circuit FIR circuitD converter circuit Viterbi detection circuitMicroprocessor unit MPU Servo ControlServo control circuit Power amplifier Servo burst capture circuitA converter DAC Spindle motor control circuitData-surface servo format Inner guard band IGBData area Outer guard band OGBPhysical sector servo configuration on disk surface Servo frame format Actuator motor control Operation to move the head to the reference cylinderSeek operation Track-following operationSpindle motor control Start modeAcceleration mode Stable rotation mode This page is intentionally left blank Interface Interface signals Physical Interface5VDC/GND Comreset / CominitComwake Signal interface regulation Out of band signalingPrimitives descriptions Electrical specifications Physical Layer Electrical Requirements 1/2Ominit COMRESET/CPhysical Layer Electrical Requirements 2/2 Connector pinouts Connector pinoutsConceptual diagram of communication layers Logical InterfaceCommunication layers Physical layerLink layer Transport layerOutline of the Shadow Block Register Shadow Block RegisterOutline of the frame information structure FIS FIS typesRegister Host to Device Register Host to Device FIS layoutRegister Device to Host DMA Active Device to HostDMA Setup Device to Host or Host to Device Bidirectional TAGBist Active Bidirectional Bist combinationsData Host to Device or Device to Host Bidirectional Data FIS Bidirectional layoutUNC Error FieldShadow block registers Features Field exp Sector Count Field expSector Number Field exp Cylinder Low Field expCylinder High Field exp Device/Head FieldHS3 HS2 HS1 HS0 HS3Bit Device Write Fault DF bit Bit Error ERR bitStatus field Bit 7 Busy BSY bitCommand Field Bit 2 Software Reset SrstDevice Control Field EStatus FieldCommand code and parameters 1/3 Host CommandsCommand code and parameters Command code and parameters 2/3 Command code and parameters 3/3 Command descriptions Error reporting conditions Recalibrate X’10’ to X’1F’Read Sectors X’20’ or X’21’ LBA LSB LBARead Long X’22’ or X’23’ Write Sectors X’30’ or X’31’ 00 *1 Error information Write Long X’32’ or X’33’ Cylinder No. LSB Write Verify X’3C’ Host Commands Read Verify Sectors X’40’ or X’41’ Host Commands Seek X’70’ to X’7F’ Execute Device Diagnostic X’90’ Diagnostic codeInitialize Device Parameters X’91’ Download Microcode X’92’ Operation of Download MicrocodeError reporting conditions Standby Immediate X’94’ or X’E0’ Idle Immediate X’95’ or X’E1’ Standby X’96’ or X’E2’ Idle X’97’ or X’E3’ Host Commands Check Power Mode X’98’ or X’E5’ ’FF’Comreset Sleep X’99’ or X’E6’Smart X’B0’ Features Field values subcommands and functions 1/3 Features Field values subcommands and functions 2/3 Smart Enable OperationsSmart Disable Operations Smart Read LOGSmart Return Status Features Field values subcommands and functions 3/3’DB’ Smart ENABLE/DISABLE Auto OFF-LINE Key C2h 1FF 11 Format of guarantee failure threshold value data10 Format of device attribute value data Data format version number Attribute IDStatus Flag Current attribute valueAttribute value for the worst case so far Raw attribute value13 Self-test execution status 12 Off-line data collection statusSelf-test execution status 15 Failure prediction capability flag 16 Drive error logging capability14 Off-line data collection capability Guarantee failure threshold Smart error loggingChecksum 17 Log Directory Data Format18 Data format of Smart Summary Error Log 1/2 18 Data format of Smart Summary Error Log 2/2 Command data structureError data structure Total number of drive errors19 Data format of Smart Comprehensive Error Log Smart Self-Test20 Smart self-test log data format 1FCSelf-test number Self-test indexCurrent LBA under test 21 Selective self-test log data structureTest Span Feature Flags 22 Selective self-test feature flagsCurrent Span under test Selective Self-test pending time minDevice Configuration XB1 Device Configuration RestoreDevice Configuration Freeze Device Configuration IdentifyDevice Configuration Restore Features Field = C0h Device Configuration Freeze Lock Features Field = C1hDevice Configuration Identify Features Field = C2h Device Configuration SET Features Field = C3h23 Device Configuration Identify data structure Word Value ContentRead Multiple X’C4’ Execution example of Read Multiple command LBA LSB Write Multiple X’C5’ At command issuance Shadow Block Registers setting contents SET Multiple Mode X’C6’ Host Commands Read DMA X’C8’ or X’C9’ LBA Write DMA X’CA’ or X’CB’ Host Commands Read Buffer X’E4’ Flush Cache X’E7’ Write Buffer X’E8’ Identify Device X’EC’ Identify Device DMA X’EE’ 24 Information to be read by Identify Device command 1/3 ’3FFF’24 Information to be read by Identify Device command 2/3 24 Information to be read by Identify Device command 3/3 Interface Bit 0 Reserved C141-E203-01EN FIS Host Commands Word Bit Bit 0 1 = Supports the Mode C141-E203-01EN Interface SET Features X’EF’ 25 Features field values and settable modes 1/225 Features field values and settable modes 2/2 Data Transfer Mode Advanced Power Management APM Serial ATA Functions Automatic Acoustic Management AAM26 Contents of Security SET Password data Error reporting conditions Security UNLOCKX’F2’ When the master password is selectedWhen the user password is selected Host Commands Security Erase Prepare X’F3’ Security Erase Unit X’F4’ Security Freeze Lock X’F5’ Error reporting conditions 28 Contents of security password Error reporting conditions Read Native MAX Address X’F8’ LbalsbSET MAX X’F9’ SET MAX AddressSET MAX SET Password Features Field = 01h Password information SET MAX Lock Features Field = 02h SET MAX Unlock Features Field = 03h SET MAX Freeze Lock Features Field = 04h SN EXP Read Sector S EXT X’24’ DescriptionCL EXP Read DMA EXT X’25’ Description Read Native MAX Address EXT X’27’ Read Multiple EXT X’29’ Read LOG EXT X2F CL EXP SN EXP 29 Data format of Read Log Ext log page 10h 30 Tag field informationWrite Sector S EXT X’34’ Description Write DMA EXT X’35’ Description SET MAX Address EXT X’37’ SET MAX LBA Write Multiple EXT X’39’ Write LOG EXT X3F Error information 132 C141-E203-01EN Read Verify Sector S EXT X’42’ Flush Cache EXT X’EA’ Write Multiple FUA EXT XCE Write DMA FUA EXT X3D Read FP DMA Queued Write FP DMA Queued Error posting 31 Command code and parameters 1/2Command Name Sfrw Sfrr31 Command code and parameters 2/2 Execute Device Diagnostic Initialize Device Parameters Command ProtocolNon-data command protocol Host PIO data-in command protocol PIO data-out command protocol Piosu Data12 PIO data-out command protocol PiosuDMA data-in command protocol Read DMA EXT Identfy DMADMA data-out command protocol Write DMA EXT FUA EXTNative Command Queuing protocol Read FP DMA Queued Write FP DMA Queued15 Read FP DMA Queued command protocol 16 Write FP DMA Queued command protocol Power-on and Comreset 17 Power-on sequence18 Comreset sequence Operations Reset and Diagnosis Response to power-onReset and Diagnosis Response to Comreset Response to ComresetResponse to a software reset Response to a software resetPower Save Power save modeActive mode Active idle modeStandby mode Sleep modePower commands Partial mode Interface Power SavePower save mode of the interface Slumber mode 8MB buffer Read-ahead CacheData buffer structure Data that is a target of caching Commands that are targets of cachingCaching operation Invalidating caching-target data Using the read segment buffer Miss-hitSequential hit Full hitHAP end location of the previous read command Partial hit Command that are targets of caching Write CacheCache operation Invalidation of cached dataStatus report in the event of an error Comreset and software reset responseCashing function when power supply is turned on Enabling and disablingThis page is intentionally left blank Glossary Power save mode Rotational delayPIO Programmed input-output PositioningAcronyms and Abbreviations This page is intentionally left blank Block diagram IndexIndex Device-initiated interface power Frame information structure FIS Moving head to reference cylinder .4-13 Read Native MAX Address RLL algorithm run length limitedSensing and compensating for IN-8 C141-E203-01EN Japan Comment FormDisk Drives Product Manual This page is intentionally left blank C141-E203-01EN This page is intentionally left blank