
Contents
Illustrations
Figures
Figure 1.1 | Negative voltage at +5 V when power is turned off | |
Figure 1.2 | Current fluctuation (Typ.) at +5 V when power is turned on | |
Figure 2.1 | Disk drive outerview | |
Figure 2.2 | Drive system configuration | |
Figure 3.1 | Dimensions | |
Figure 3.2 | Orientation | |
Figure 3.3 | Mounting frame structure | |
Figure 3.4 | Location of breather | |
Figure 3.5 | Surface cover temperature measurement points | |
Figure 3.6 | Service area | |
Figure 3.7 | Handling cautions | |
Figure 3.8 | Connector locations | |
Figure 3.9 Power supply pins (CN1) | ||
Figure 4.1 | Power Supply Configuration | |
Figure 4.2 | Circuit Configuration | |
Figure 4.3 |
| |
Figure 4.4 | Read/write circuit block diagram | |
Figure 4.5 | Frequency characteristic of programmable filter | |
Figure 4.6 | Block diagram of servo control circuit | |
Figure 4.7 | Physical sector servo configuration ( on disk surface | |
Figure 4.8 | Servo frame format | |
Figure 5.1 | Interface signals | |
Figure 5.2 | Conceptual diagram of communication layers | |
Figure 5.3 | Register - Host to Device FIS layout | |
Figure 5.4 | Register - Device to Host FIS layout | |
Figure 5.5 DMA Active - Device to Host FIS layout | ||
Figure 5.6 DMA Setup - Device to Host or Host to Device FIS layout | ||
Figure 5.7 | BIST Active - Bidirectional FIS layout | |
Figure 5.8 | Data FIS (Bidirectional) layout | |
Figure 5.9 Execution example of READ MULTIPLE command | ||
Figure 5.10 |
xv |