Manuals / Fujitsu / Computer Equipment / Computer Drive

Fujitsu MHT2060BH, MHT2040BH manual Cylinder High Field exp, Device/Head Field, HS3 HS2 HS1 HS0

Models: MHT2080BH MHT2060BH MHT2040BH

1 264

Download 264 pages 35.52 Kb

Page 93

5.2 Logical Interface

(6)Cylinder High Field (exp)

The contents of this field indicates high-order 8 bits of the disk-access start cylinder address.

At the end of a command, the contents of this field are updated to the current cylinder number. The high-order 8 bits of the cylinder address are set to the Cylinder High Register.

Under the LBA mode, this field indicates LBA bits 23 to 16. Under the LBA mode of the EXT system command, LBA bits 47 to 40 are set in the Cylinder High Field, and LBA bits 23 to 16 are set in the Cylinder High Field (exp).

(7)Device/Head Field

The contents of this field indicate the device and the head number.

When executing INITIALIZE DEVICE PARAMETERS command, the contents of this field defines “the number of heads minus 1” (a maximum head No.).

Bit 7	Bit 6	Bit 5	Bit 4	Bit 3	Bit 2	Bit 1	Bit 0

X	L	X	X	HS3	HS2	HS1	HS0

-Bit 7: Unused

-Bit 6: L. 0 for CHS mode and 1 for LBA mode.

-Bit 5: Unused

-Bit 4: Unused

- Bit 3:	HS3	CHS mode head address 3 (23). bit 27 for LBA mode.
		Unused under the LBA mode of the EXT command.
- Bit 2:	HS2	CHS mode head address 2 (22). bit 26 for LBA mode.
		Unused under the LBA mode of the EXT command.
- Bit 1:	HS1	CHS mode head address 1 (21). bit 25 for LBA mode.
		Unused under the LBA mode of the EXT command.
- Bit 0:	HS0	CHS mode head address 0 (20). bit 24 for LBA mode.
		Unused under the LBA mode of the EXT command.

C141-E203-01EN

5-19

Image 93

Fujitsu MHT2060BH, MHT2040BH, MHT2080BH manual Cylinder High Field exp, Device/Head Field, HS3 HS2 HS1 HS0

Contents

Disk Drives Product Manual MHT2080BH, MHT2060BH, MHT2040BHHandling of This Manual For Safe OperationRevision History This page is intentionally left blank Overview of Manual PrefaceConventions for Alert Messages Operating EnvironmentConventions Liability Exception This page is intentionally left blank Important Alert Messages Important Alert ItemsThis page is intentionally left blank MHT2040BH Disk Drives Maintenance Manual Manual OrganizationMHT2040BH Disk Drives Product Manual This page is intentionally left blank Contents Theory of Device Operation Installation ConditionsInterface 102 Operations GL-1 Acronyms and Abbreviations AB-1IN-1 Figures IllustrationsResponse to power-on when the host is powered Tables Recommended connector specifications for the host systemRelationship between combination of Identifier and Security Device Overview Features Functions and performanceAdaptability Interface Specifications summary Device SpecificationsSpecifications 1/2 MHT2080BH MHT2060BH MHT2040BHModel and product number Specifications 2/2MHT2080BH Examples of model names and product numbersPower Requirements Input VoltageRipple Current and power dissipation Current Requirements and Power DissipationCurrent fluctuation Typ. at +5 V when power is turned on Environmental SpecificationsPower on/off sequence Environmental specificationsShock and vibration specification Acoustic noise specificationAcoustic Noise Shock and VibrationData assurance in the event of power failure Service lifeReliability Mean time between failures MtbfUnrecoverable read error Error RatePositioning error Media DefectsAdvanced Power Management Advanced power management Interface Power Management IPM Host-initiated Interface Power Management HipmDevice-initiated Interface Power Management Dipm Interface power management This page is intentionally left blank Device Configuration Device Configuration Sata interface System ConfigurationDrive connection Read/write circuitThis page is intentionally left blank Installation Conditions Dimensions DimensionsMounting Integration Guidance C141-E144Orientation Frame Limitation of mountingPCA Location of breather Ambient temperature Handling cautions Service areaESD Sumitomo 3MHios Connections with Host System Device connectorConnector specifications for host system Signal segment and power supply segmentRecommended connector specifications for the host system Sata interface cable connection This page is intentionally left blank Theory of Device Operation Subassemblies OutlineDisk SpindleAir filter Circuit ConfigurationServo circuit Spindle motor driver circuitPower Supply Configuration PCA Power-on operation sequence Power-on SequenceSelf-calibration Self-calibration contentsExecution timing of self-calibration Command processing during self-calibrationRead/write preamplifier PreAMP Read/write CircuitWrite circuit RLL code MeeprmlRead circuit AGC circuitProgrammable filter circuit FIR circuit Digital PLL circuitD converter circuit Viterbi detection circuitServo Control Servo control circuitMicroprocessor unit MPU Servo burst capture circuit Power amplifierA converter DAC Spindle motor control circuitInner guard band IGB Data-surface servo formatData area Outer guard band OGBPhysical sector servo configuration on disk surface Servo frame format Operation to move the head to the reference cylinder Actuator motor controlSeek operation Track-following operationStart mode Acceleration modeSpindle motor control Stable rotation mode This page is intentionally left blank Interface Physical Interface Interface signalsComreset / Cominit Comwake5VDC/GND Out of band signaling Signal interface regulationPrimitives descriptions Physical Layer Electrical Requirements 1/2 Electrical specificationsCOMRESET/C Physical Layer Electrical Requirements 2/2Ominit Connector pinouts Connector pinoutsLogical Interface Conceptual diagram of communication layersPhysical layer Communication layersLink layer Transport layerShadow Block Register Outline of the Shadow Block RegisterFIS types Outline of the frame information structure FISRegister Host to Device Register Host to Device FIS layoutDMA Active Device to Host Register Device to HostTAG DMA Setup Device to Host or Host to Device BidirectionalBist combinations Bist Active BidirectionalData FIS Bidirectional layout Data Host to Device or Device to Host BidirectionalError Field Shadow block registersUNC Sector Count Field exp Features Field expSector Number Field exp Cylinder Low Field expDevice/Head Field Cylinder High Field expHS3 HS2 HS1 HS0 HS3Bit Error ERR bit Bit Device Write Fault DF bitStatus field Bit 7 Busy BSY bitBit 2 Software Reset Srst Command FieldDevice Control Field EStatus FieldHost Commands Command code and parametersCommand code and parameters 1/3 Command code and parameters 2/3 Command code and parameters 3/3 Command descriptions Recalibrate X’10’ to X’1F’ Error reporting conditionsRead Sectors X’20’ or X’21’ LBA LBA LSBRead Long X’22’ or X’23’ Write Sectors X’30’ or X’31’ 00 *1 Error information Write Long X’32’ or X’33’ Cylinder No. LSB Write Verify X’3C’ Host Commands Read Verify Sectors X’40’ or X’41’ Host Commands Seek X’70’ to X’7F’ Diagnostic code Execute Device Diagnostic X’90’Initialize Device Parameters X’91’ Operation of Download Microcode Download Microcode X’92’Error reporting conditions Standby Immediate X’94’ or X’E0’ Idle Immediate X’95’ or X’E1’ Standby X’96’ or X’E2’ Idle X’97’ or X’E3’ Host Commands ’FF’ Check Power Mode X’98’ or X’E5’Sleep X’99’ or X’E6’ ComresetSmart X’B0’ Features Field values subcommands and functions 1/3 Smart Enable Operations Features Field values subcommands and functions 2/3Smart Disable Operations Smart Read LOGFeatures Field values subcommands and functions 3/3 ’DB’ Smart ENABLE/DISABLE Auto OFF-LINESmart Return Status Key C2h 11 Format of guarantee failure threshold value data 10 Format of device attribute value data1FF Attribute ID Data format version numberCurrent attribute value Status FlagAttribute value for the worst case so far Raw attribute value12 Off-line data collection status Self-test execution status13 Self-test execution status 16 Drive error logging capability 14 Off-line data collection capability15 Failure prediction capability flag Smart error logging Guarantee failure thresholdChecksum 17 Log Directory Data Format18 Data format of Smart Summary Error Log 1/2 Command data structure 18 Data format of Smart Summary Error Log 2/2Error data structure Total number of drive errorsSmart Self-Test 19 Data format of Smart Comprehensive Error Log1FC 20 Smart self-test log data formatSelf-test number Self-test index21 Selective self-test log data structure Test SpanCurrent LBA under test 22 Selective self-test feature flags Feature FlagsCurrent Span under test Selective Self-test pending time minDevice Configuration Restore Device Configuration XB1Device Configuration Freeze Device Configuration IdentifyDevice Configuration Freeze Lock Features Field = C1h Device Configuration Restore Features Field = C0hDevice Configuration SET Features Field = C3h Device Configuration Identify Features Field = C2hWord Value Content 23 Device Configuration Identify data structureRead Multiple X’C4’ Execution example of Read Multiple command LBA LSB Write Multiple X’C5’ At command issuance Shadow Block Registers setting contents SET Multiple Mode X’C6’ Host Commands Read DMA X’C8’ or X’C9’ LBA Write DMA X’CA’ or X’CB’ Host Commands Read Buffer X’E4’ Flush Cache X’E7’ Write Buffer X’E8’ Identify Device X’EC’ Identify Device DMA X’EE’ ’3FFF’ 24 Information to be read by Identify Device command 1/324 Information to be read by Identify Device command 2/3 24 Information to be read by Identify Device command 3/3 Interface Bit 0 Reserved C141-E203-01EN FIS Host Commands Word Bit Bit 0 1 = Supports the Mode C141-E203-01EN Interface 25 Features field values and settable modes 1/2 SET Features X’EF’25 Features field values and settable modes 2/2 Data Transfer Mode Advanced Power Management APM Automatic Acoustic Management AAM Serial ATA Functions26 Contents of Security SET Password data Error reporting conditions When the master password is selected When the user password is selectedSecurity UNLOCKX’F2’ Host Commands Security Erase Prepare X’F3’ Security Erase Unit X’F4’ Security Freeze Lock X’F5’ Error reporting conditions 28 Contents of security password Error reporting conditions Lbalsb Read Native MAX Address X’F8’SET MAX Address SET MAX X’F9’SET MAX SET Password Features Field = 01h Password information SET MAX Lock Features Field = 02h SET MAX Unlock Features Field = 03h SET MAX Freeze Lock Features Field = 04h Read Sector S EXT X’24’ Description CL EXPSN EXP Read DMA EXT X’25’ Description Read Native MAX Address EXT X’27’ Read Multiple EXT X’29’ Read LOG EXT X2F CL EXP SN EXP 30 Tag field information 29 Data format of Read Log Ext log page 10hWrite Sector S EXT X’34’ Description Write DMA EXT X’35’ Description SET MAX Address EXT X’37’ SET MAX LBA Write Multiple EXT X’39’ Write LOG EXT X3F Error information 132 C141-E203-01EN Read Verify Sector S EXT X’42’ Flush Cache EXT X’EA’ Write Multiple FUA EXT XCE Write DMA FUA EXT X3D Read FP DMA Queued Write FP DMA Queued 31 Command code and parameters 1/2 Error postingCommand Name Sfrw Sfrr31 Command code and parameters 2/2 Command Protocol Non-data command protocolExecute Device Diagnostic Initialize Device Parameters Host PIO data-in command protocol Piosu Data PIO data-out command protocolPiosu 12 PIO data-out command protocolRead DMA EXT Identfy DMA DMA data-in command protocolWrite DMA EXT FUA EXT DMA data-out command protocolRead FP DMA Queued Write FP DMA Queued Native Command Queuing protocol15 Read FP DMA Queued command protocol 16 Write FP DMA Queued command protocol 17 Power-on sequence Power-on and Comreset18 Comreset sequence Operations Response to power-on Reset and DiagnosisReset and Diagnosis Response to Comreset Response to ComresetResponse to a software reset Response to a software resetPower save mode Power SaveActive mode Active idle modeSleep mode Standby modePower commands Interface Power Save Power save mode of the interfacePartial mode Slumber mode Read-ahead Cache Data buffer structure8MB buffer Commands that are targets of caching Caching operationData that is a target of caching Invalidating caching-target data Miss-hit Using the read segment bufferFull hit Sequential hitHAP end location of the previous read command Partial hit Write Cache Command that are targets of cachingCache operation Invalidation of cached dataComreset and software reset response Status report in the event of an errorCashing function when power supply is turned on Enabling and disablingThis page is intentionally left blank Glossary Rotational delay Power save modePIO Programmed input-output PositioningAcronyms and Abbreviations This page is intentionally left blank Index Block diagramIndex Device-initiated interface power Frame information structure FIS Moving head to reference cylinder .4-13 RLL algorithm run length limited Read Native MAX AddressSensing and compensating for IN-8 C141-E203-01EN Comment Form Disk Drives Product ManualJapan This page is intentionally left blank C141-E203-01EN This page is intentionally left blank