Advanced Power Management APM | Fujitsu MHT2060BH, MHT2040BH

Interface

	Transfer mode	Sector Count file

•	Multiword DMA transfer mode X	00100 000 (X’20’: Mode 0)

		00100 001 (X’21’: Mode 1)

		00100 010 (X’22’: Mode 2)

•	Ultra DMA transfer mode X	01000 000 (X’40’: Mode 0)

		01000 001 (X’41’: Mode 1)

		01000 010 (X’42’: Mode 2)

		01000 011 (X’43’: Mode 3)

		01000 100 (X’44’: Mode 4)

		01000 101 (X’45’: Mode 5)

*2) Advanced Power Management (APM)

The host writes the Sector Count field with the desired power management level and executes this command with the Features field X’05’, and then Advanced Power Management is enabled.

The drive automatically shifts to power saving mode up to the specified APM level when the drive does not receive any commands for a specific time. The sequence in which the power management level shifts is from Active Idle to Low Power Idle to Standby. The Mode-2 level requires the longest shifting time, depending on the APM level settings. The settings of the APM level revert to their default values (Mode-1) when power-on or a hardware reset occurs for the drive.

APM Level		Sector Count Field

Mode 0 Active Idle →	Low Power Idle	C0h-FEh
Mode 1 Active Idle →	Low Power Idle	80h-BFh
Mode 2 Active Idle →	Low Power Idle → Standby	01h-7Fh
Reserve (State Keep)		00h, FFh

Active Idle:	The spindle motor rotates, and the head is loaded on
	the most inner position on media.

Low Power Idle: The spindle motor rotates, and the head is unloaded.

Standby:

The spindle motor stops, and the head is unloaded.

5-100

C141-E203-01EN

Image 174

Fujitsu MHT2060BH, MHT2040BH, MHT2080BH manual Advanced Power Management APM

Contents

MHT2080BH, MHT2060BH, MHT2040BH Disk Drives Product Manual For Safe Operation Handling of This Manual Revision History This page is intentionally left blank Preface Overview of Manual Conventions for Alert Messages Operating EnvironmentConventions Liability Exception This page is intentionally left blank Important Alert Items Important Alert Messages This page is intentionally left blank MHT2040BH Disk Drives Maintenance Manual Manual OrganizationMHT2040BH Disk Drives Product Manual This page is intentionally left blank Contents Installation Conditions Theory of Device Operation Interface 102 Operations GL-1 Acronyms and Abbreviations AB-1IN-1 Illustrations Figures Response to power-on when the host is powered Recommended connector specifications for the host system Tables Relationship between combination of Identifier and Security Device Overview Features Functions and performanceAdaptability Interface Specifications 1/2 Device SpecificationsSpecifications summary MHT2080BH MHT2060BH MHT2040BH MHT2080BH Specifications 2/2Model and product number Examples of model names and product numbers Power Requirements Input VoltageRipple Current Requirements and Power Dissipation Current and power dissipation Power on/off sequence Environmental SpecificationsCurrent fluctuation Typ. at +5 V when power is turned on Environmental specifications Acoustic Noise Acoustic noise specificationShock and vibration specification Shock and Vibration Reliability Service lifeData assurance in the event of power failure Mean time between failures Mtbf Positioning error Error RateUnrecoverable read error Media Defects Advanced Power Management Advanced power management Interface Power Management IPM Host-initiated Interface Power Management HipmDevice-initiated Interface Power Management Dipm Interface power management This page is intentionally left blank Device Configuration Device Configuration Drive connection System ConfigurationSata interface Read/write circuit This page is intentionally left blank Installation Conditions Dimensions Dimensions Mounting Integration Guidance C141-E144Orientation Frame Limitation of mountingPCA Location of breather Ambient temperature Service area Handling cautions ESD Sumitomo 3MHios Device connector Connections with Host System Connector specifications for host system Signal segment and power supply segmentRecommended connector specifications for the host system Sata interface cable connection This page is intentionally left blank Theory of Device Operation Disk OutlineSubassemblies Spindle Servo circuit Circuit ConfigurationAir filter Spindle motor driver circuit Power Supply Configuration PCA Power-on Sequence Power-on operation sequence Self-calibration contents Self-calibration Command processing during self-calibration Execution timing of self-calibration Write circuit Read/write CircuitRead/write preamplifier PreAMP RLL code Meeprml Read circuit AGC circuitProgrammable filter circuit D converter circuit Digital PLL circuitFIR circuit Viterbi detection circuit Servo Control Servo control circuitMicroprocessor unit MPU A converter DAC Power amplifierServo burst capture circuit Spindle motor control circuit Data area Data-surface servo formatInner guard band IGB Outer guard band OGB Physical sector servo configuration on disk surface Servo frame format Seek operation Actuator motor controlOperation to move the head to the reference cylinder Track-following operation Start mode Acceleration modeSpindle motor control Stable rotation mode This page is intentionally left blank Interface Interface signals Physical Interface Comreset / Cominit Comwake5VDC/GND Signal interface regulation Out of band signaling Primitives descriptions Electrical specifications Physical Layer Electrical Requirements 1/2 COMRESET/C Physical Layer Electrical Requirements 2/2Ominit Connector pinouts Connector pinouts Conceptual diagram of communication layers Logical Interface Link layer Communication layersPhysical layer Transport layer Outline of the Shadow Block Register Shadow Block Register Register Host to Device Outline of the frame information structure FISFIS types Register Host to Device FIS layout Register Device to Host DMA Active Device to Host DMA Setup Device to Host or Host to Device Bidirectional TAG Bist Active Bidirectional Bist combinations Data Host to Device or Device to Host Bidirectional Data FIS Bidirectional layout Error Field Shadow block registersUNC Sector Number Field exp Features Field expSector Count Field exp Cylinder Low Field exp HS3 HS2 HS1 HS0 Cylinder High Field expDevice/Head Field HS3 Status field Bit Device Write Fault DF bitBit Error ERR bit Bit 7 Busy BSY bit Device Control Field Command FieldBit 2 Software Reset Srst EStatus Field Host Commands Command code and parametersCommand code and parameters 1/3 Command code and parameters 2/3 Command code and parameters 3/3 Command descriptions Error reporting conditions Recalibrate X’10’ to X’1F’ Read Sectors X’20’ or X’21’ LBA LSB LBA Read Long X’22’ or X’23’ Write Sectors X’30’ or X’31’ 00 *1 Error information Write Long X’32’ or X’33’ Cylinder No. LSB Write Verify X’3C’ Host Commands Read Verify Sectors X’40’ or X’41’ Host Commands Seek X’70’ to X’7F’ Execute Device Diagnostic X’90’ Diagnostic code Initialize Device Parameters X’91’ Download Microcode X’92’ Operation of Download Microcode Error reporting conditions Standby Immediate X’94’ or X’E0’ Idle Immediate X’95’ or X’E1’ Standby X’96’ or X’E2’ Idle X’97’ or X’E3’ Host Commands Check Power Mode X’98’ or X’E5’ ’FF’ Comreset Sleep X’99’ or X’E6’ Smart X’B0’ Features Field values subcommands and functions 1/3 Smart Disable Operations Features Field values subcommands and functions 2/3Smart Enable Operations Smart Read LOG Features Field values subcommands and functions 3/3 ’DB’ Smart ENABLE/DISABLE Auto OFF-LINESmart Return Status Key C2h 11 Format of guarantee failure threshold value data 10 Format of device attribute value data1FF Data format version number Attribute ID Attribute value for the worst case so far Status FlagCurrent attribute value Raw attribute value 12 Off-line data collection status Self-test execution status13 Self-test execution status 16 Drive error logging capability 14 Off-line data collection capability15 Failure prediction capability flag Checksum Guarantee failure thresholdSmart error logging 17 Log Directory Data Format 18 Data format of Smart Summary Error Log 1/2 Error data structure 18 Data format of Smart Summary Error Log 2/2Command data structure Total number of drive errors 19 Data format of Smart Comprehensive Error Log Smart Self-Test Self-test number 20 Smart self-test log data format1FC Self-test index 21 Selective self-test log data structure Test SpanCurrent LBA under test Current Span under test Feature Flags22 Selective self-test feature flags Selective Self-test pending time min Device Configuration Freeze Device Configuration XB1Device Configuration Restore Device Configuration Identify Device Configuration Restore Features Field = C0h Device Configuration Freeze Lock Features Field = C1h Device Configuration Identify Features Field = C2h Device Configuration SET Features Field = C3h 23 Device Configuration Identify data structure Word Value Content Read Multiple X’C4’ Execution example of Read Multiple command LBA LSB Write Multiple X’C5’ At command issuance Shadow Block Registers setting contents SET Multiple Mode X’C6’ Host Commands Read DMA X’C8’ or X’C9’ LBA Write DMA X’CA’ or X’CB’ Host Commands Read Buffer X’E4’ Flush Cache X’E7’ Write Buffer X’E8’ Identify Device X’EC’ Identify Device DMA X’EE’ 24 Information to be read by Identify Device command 1/3 ’3FFF’ 24 Information to be read by Identify Device command 2/3 24 Information to be read by Identify Device command 3/3 Interface Bit 0 Reserved C141-E203-01EN FIS Host Commands Word Bit Bit 0 1 = Supports the Mode C141-E203-01EN Interface SET Features X’EF’ 25 Features field values and settable modes 1/2 25 Features field values and settable modes 2/2 Data Transfer Mode Advanced Power Management APM Serial ATA Functions Automatic Acoustic Management AAM 26 Contents of Security SET Password data Error reporting conditions When the master password is selected When the user password is selectedSecurity UNLOCKX’F2’ Host Commands Security Erase Prepare X’F3’ Security Erase Unit X’F4’ Security Freeze Lock X’F5’ Error reporting conditions 28 Contents of security password Error reporting conditions Read Native MAX Address X’F8’ Lbalsb SET MAX X’F9’ SET MAX Address SET MAX SET Password Features Field = 01h Password information SET MAX Lock Features Field = 02h SET MAX Unlock Features Field = 03h SET MAX Freeze Lock Features Field = 04h Read Sector S EXT X’24’ Description CL EXPSN EXP Read DMA EXT X’25’ Description Read Native MAX Address EXT X’27’ Read Multiple EXT X’29’ Read LOG EXT X2F CL EXP SN EXP 29 Data format of Read Log Ext log page 10h 30 Tag field information Write Sector S EXT X’34’ Description Write DMA EXT X’35’ Description SET MAX Address EXT X’37’ SET MAX LBA Write Multiple EXT X’39’ Write LOG EXT X3F Error information 132 C141-E203-01EN Read Verify Sector S EXT X’42’ Flush Cache EXT X’EA’ Write Multiple FUA EXT XCE Write DMA FUA EXT X3D Read FP DMA Queued Write FP DMA Queued Command Name Error posting31 Command code and parameters 1/2 Sfrw Sfrr 31 Command code and parameters 2/2 Command Protocol Non-data command protocolExecute Device Diagnostic Initialize Device Parameters Host PIO data-in command protocol PIO data-out command protocol Piosu Data 12 PIO data-out command protocol Piosu DMA data-in command protocol Read DMA EXT Identfy DMA DMA data-out command protocol Write DMA EXT FUA EXT Native Command Queuing protocol Read FP DMA Queued Write FP DMA Queued 15 Read FP DMA Queued command protocol 16 Write FP DMA Queued command protocol Power-on and Comreset 17 Power-on sequence 18 Comreset sequence Operations Reset and Diagnosis Response to power-on Reset and Diagnosis Response to Comreset Response to Comreset Response to a software reset Response to a software reset Active mode Power SavePower save mode Active idle mode Standby mode Sleep mode Power commands Interface Power Save Power save mode of the interfacePartial mode Slumber mode Read-ahead Cache Data buffer structure8MB buffer Commands that are targets of caching Caching operationData that is a target of caching Invalidating caching-target data Using the read segment buffer Miss-hit Sequential hit Full hit HAP end location of the previous read command Partial hit Cache operation Command that are targets of cachingWrite Cache Invalidation of cached data Cashing function when power supply is turned on Status report in the event of an errorComreset and software reset response Enabling and disabling This page is intentionally left blank Glossary PIO Programmed input-output Power save modeRotational delay Positioning Acronyms and Abbreviations This page is intentionally left blank Block diagram Index Index Device-initiated interface power Frame information structure FIS Moving head to reference cylinder .4-13 Read Native MAX Address RLL algorithm run length limited Sensing and compensating for IN-8 C141-E203-01EN Comment Form Disk Drives Product ManualJapan This page is intentionally left blank C141-E203-01EN This page is intentionally left blank