HP 930c manual Using a USB Cable Requires Windows, Install USB software. a Click Next

5More About Your Printer

Using a USB Cable (Requires Windows 98)

1Plug in electrical power cord.

Do NOT plug in the USB cable yet.

2Load white paper, printable side down.

3Insert print cartridges.

a Press Power Button to turn on printer. b Remove vinyl tape from print cartridges.

Do NOT touch or remove copper strip on print cartridges.

c Open the printer’s top cover, then insert print cartridges.

d Close cartridge cradle latches, then close the printer’s top cover. Printer will print a calibration page.

4Insert printer software CD.

a Turn on your computer and wait for Windows 98 to start.

b Insert the HP Printer Software CD into your CD-ROM drive.

Note: Your printer software will not start until after you have connected the USB cable.

5Connect USB cable.

•You can connect to any USB port.

•If the New Hardware Found Wizard dialog box does not appear after you plug in the USB cable, see page 35 for more information.

•A USB cable, such as an HP USB-Compliant Interface Cable (part number C6518A), should be purchased separately.

6Install USB software. a Click Next.

b Click Next.

c Check Specify a Location, then click Browse.

d Double-click on the CD icon, then click on the win98usb folder, then click OK.

1

2

3

eClick Next.

Note: The drive letter may be different on your system.

fClick Next.

gClick Finish.

7Install printer software. a Click Next.

b Follow on-screen instructions to install your printer software.

Note: If you have problems installing, see pages 33–35 in this User’s Guide.

50