HP 930c manual Paper Type Choose HP Photo Paper, Orientation Choose appropriate orientation

Setup Tab

Beyond the Basics 2

Features Tab

HP print settings to choose

Setup Tab

-Paper Type: Choose HP Photo Paper

-Print Quality: Choose Best

-Paper Size: Choose appropriate paper size

Features Tab

-Orientation: Choose appropriate orientation

-Two-Sided Printing: Unchecked

Setup Tab

-Paper Type: Choose appropriate paper type

-Print Quality: Choose Normal or Best

-Paper Size: Choose appropriate card size

Features Tab

-Orientation: Choose appropriate orientation

-Two-Sided Printing: Unchecked

Guidelines to remember

•For best results use HP Photo Paper.

•The photo needs to be in electronic (digital) form, before you can print it. Take a digital picture, scan a photo, or have your local camera shop provide an electronic file of your photo.

•After selecting your paper type, choose the appropriate paper size from the pull-down menu.

•You may be able to increase photo printing speed by enabling Hardware ECP. Open the HP DeskJet Toolbox. Click the Configuration tab and check Attempt to Use Hardware ECP. Apply your changes and print your photo.

•Align the card edges before inserting the cards.

•If you get an “out of paper” message, make sure that the photo paper or other small media is positioned properly in the IN tray. Place the media on the right side and towards the printer. The IN tray should be pushed in so that the paper length guide can hold the media in place.

•If your media is smaller than 100 x 148 mm (4 x 5 5/8 inches, use the single envelope slot to load your media one sheet at a time.

11