HP 930c manual Printer Maintenance Tips, OUT Tray

Printing Basics 1

OUT Tray

The printer sends finished pages to the OUT tray.

OUT Tray Flap Down – This is the typical position for most types of printing. The down position also allows single envelope printing and printing on media smaller than 100 x 148 mm or 4 x 5 5/8 inches. For information about printing on other media, see Chapter 2.

Out Tray Flap Up – The OUT Tray Flap must be in the up position to properly load banner paper. The OUT Tray Flap must remain in the up position to print banners.

Single envelope and small media slot

	OUT Tray Flap down
		OUT Tray Flap up
Paper width guide

Printer Maintenance Tips

Because the printer ejects ink onto the paper in a fine mist, ink smudges will eventually appear on the printer case. To remove smudges, stains, and/or dried ink from the exterior of the printer, use a soft cloth moistened with water.

When cleaning your printer, keep these tips in mind:

•Do not clean the interior of the printer. Keep all fluids away from the interior.

•Do not use household cleaners or detergent. In the event that a household cleaner or detergent is used on the printer, wipe the printer’s exterior surfaces with a soft cloth moistened with water.

•Do not lubricate the print cartridge support rod. Noise is normal when the print cartridge cradles slide back and forth.

For information on cleaning print cartridges and the print cartridge cradle, see page 30.

3