USER’S GUIDE

Configuration for IP Router “Chloe”

System Information:

System Name = Chloe

System Password =pets

Security Level = Device Level (On-node

Device Database, PAP security)

Bridging disabled

IP enabled (router mode)

I/F = LAN (192.168.1.168); LAN port 1 I/F = WAN explicit (192.168.10.168)

DHCP related:

max addrs to obtain=10 num addrs to pre-fetch=5 LAN port to reach server=1

DHCP configuration:

Relay Agent disabled.

Proxy Client enabled.

Device = “Summer”

ISDN Line Protocol = PPP

PAP Password = “dogs”

IP Address = (none)

IP Routing = enabled

IP callable = disabled

Bridging = disabled

SECURITY ASSOCIATIONS

The steps to configure security associations are merely listed here. For more detailed information, refer to Configuring Encryption.

CONFIGURING SECURITY ASSOCIATIONS

USING CFGEDIT

1.Select Security Associations from the IP Routing menu, and then select Add.

2.Select packet direction. You may choose outgoing (packets from trusted subnet to remote site), incoming (packets to trusted local subnet from a remote site), or both.

3.Enter the final destination IP address and subnet mask.

4.Enter the Source IP address and subnet mask.

5.Enter the destination gateway/IP address.

6.Enter an Initial Value (IV) length.

7.Enter Authentication Header information.

8.Enter the shared secret key.

9.Enter SPI information.

318 CyberSWITCH

Page 318
Image 318
Enterasys Networks CSX5500, CSX6000, CSX7000 manual Security Associations, Configuration for IP Router Chloe