System log Client Configuration Interface
Port Configuration
You can set up every port status.
1.Select <Edit>
2.Use “Tab/Backspace” key to move between items.
3.Type: display port connection speed.
4.State: Current port status. The port can be set to disable or enable mode. If the port setting is disable then will not receive or transmit any packet.
5.Negotiation: set auto negotiation function of port.
6.Speed/Duplex: set the port link speed and duplex mode.
7.FC: enable or disable Flow control function (Flow control for full duplex link mode).
8.BP: enable or disable Back Pressure function (Backpressure for half duplex mode).
9.Bandwidth In/ Out: per port packet transmission rate control. Per level is 100Kbps. It supports individual control method of TX and RX.
10.Priority: set packet of port to high or low priority queue.
11.Security: enable or disable port security function.
12.Select the <Apply>.
70
