128
When you had setup the LACP aggregator, you can configure port state activity. You can
mark or un-mark the port. When you mark the port and click
Apply
button the port state
activity will change to Active. Opposite is Passive.
1. Active: The port automatically sends LACP protocol packets.
2. Passive: The port does not automatically send LACP protocol packets, and responds
only if it receives LACP protocol packets from the opposite device.
[Note]
1. A link having either two active LACP ports or one active port can perform dynamic
LACP trunking.
2. A link has two passive LACP ports will not perform dynamic LACP trunking
because both po rts are waiting fo r and LACP p rotocol packet from the opposite
device.
3. If you are active LACP’s actor, when you are select trunking port, the active status
will be created automatically.