You can create
GVRP allows automatic VLAN configuration between the switch and nodes. If the switch is connected to a device with GVRP enabled, you can send a GVRP request using the VID of a VLAN defined on the switch; the switch will automatically add that device to the existing VLAN.
802.1q VLAN interface
Click the hyperlink “Configuration” to enter the VLAN configuration interface.
Enable GVRP Protocol: checked the box to enable GVRP protocol.
Enable security VLAN setting: checked the box to enable security VLAN group. When you select to enable security VLAN group, only the members in this VLAN group can access to the switch. The steps of setting security VLAN refer to the following below steps in Basic section. After you have configured the security VLAN group, you can continue to create other VLAN groups.
[Note] There is only one security VLAN group.
137
