Milan Technology MIL-SM2401MAF manual

		Use the
		spanning-tree		Switch (config)#
spanning-tree		global configuration
				spanning-tree on
[on / off]	Global	command to enable
	configuration	Spanning Tree	Disable	or
or	mode	Protocol (STP). Use
				Switch (config)# no
no spanning-tree		the no form of the
				spanning-tree
		command to restore
		to default
		Use the
		spanning-tree
		max-age global
		configuration
spanning-tree	Global	command to		Switch (config)#
	configuration	change the priority.	32768	spanning-tree
priority [number]
	mode			priority 32767
		Use the no form of
		this command to
		return to the default
		interval.
		Use the
		spanning-tree
		max-age global
spanning-tree	Global	configuration		Switch (config)#
		command to
max-age	configuration		20 sec	spanning-tree
		change the interval
[seconds]	mode			max-age 15
		between messages
		the spanning tree
		receives from the
		root switch. If a
		36