
2.Select <Edit>.
3.VLAN Name: Type a name for the new VLAN, ex: VLAN01.
4.VLAN ID: Type a VID. The default is 1. There are 256 VLAN groups to provided configure.
5.Protocol VLAN: Press “Space” key to choose protocols type.
6.Member: Press “Space” key to change the member value.
Untagged: this port is the member port of this VLAN group and outgoing frames are NO
Tagged: this port is the member port of this VLAN group and outgoing frames are
NO: it means that the port is NOT member of this VLAN group.
7.Press “ESC” key to go back action menu line.
8.Select <Apply> to apply the configuration.
[Note] If the trunk groups exist, you can see it (ex: Trunk1, Trunk2…) on the port list, and you can configure it is the member of the VLAN or not.
77