Milan Technology MIL-SM2401MAF manual Lacp

				Switch # show
		Display trunk group		group 1
show group	Privileged	information. If there		Group Trunk.1:
		is no group-number		Ports: 02 03 04
[group-ID]	EXEC mode
		in put, display all		Priority: 0001
		trunk groups.		Lacp: Enable
				Work ports: 0
port group				LACP:
[group-ID]
				Switch (config)#
[port-list] lacp		Add trunking
				port group 1 1-4
[on off] workp		group.
	Global			lacp on workp 2
[work ports]		Use the no form of
	configuration		Disable
		this command to
	mode			Trunk without LACP:
no port group		delete trunking
				Switch (config)#
[group-ID] lacp		group.
				port group 1 1-4
[on off] workp
				lacp off workp 4
[work ports]
				Switch (config)#
				port group 3
port group				activityport 2-4
	Global
[group-ID]		Set trunking group
	configuration			Trunk.1 Lacp:
activityport		port active
	mode			Enable
[port ID]
				Check OK!
				NEW: 2 4
				Update finished!!

29