Milan Technology MIL-SM2401MAF manual

		Use the
		spanning-tree cost
		interface
		configuration
		command to set the
		path cost for
		Spanning Tree
		Protocol (STP)	10 Mbps	Switch (config)#
		calculations. In the
	Interface		– 100	interface
stp-path-cost		event of a loop,
	configuration			fastEthernet 0/2
[number]		spanning tree
	mode		100 Mbps	Switch (config-if)#
		considers the path
			– 10	stp-path-cost 20
		cost when selecting
		an interface to
		place into the
		forwarding state.
		Use the no form of
		this command to
		return to the default
		value.
		Use the
		spanning-tree
		forward-time global
		configuration
spanning-tree	Global	command to set the		Switch (config)#
forward-time	configuration	forwarding-time for	15 sec.	spanning-tree
[seconds]	mode	the specified		forward-time 20
		spanning-tree
		instances. The
		forwarding time
		determines how
		38