74
VLAN Configuration You can configure VLAN group in VLAN Configuration. There are four functions in VLAN
Configuration mode: VLAN Configuration, Create a VLAN Group, Edit/Delete VLAN
Group and Group Sorted Mode. Follow the below description to configure VLAN.
VLAN Configuration Main interface
VLAN Configure
Before starting to configure VLAN, you must select the VLAN mode in VLAN Configure
function. Otherwise, user cannot create any new VLAN.
1. Select the <Edit>.
2. Select the VLAN mode by using “Tab” key. There are two VLAN modes: PortBase
mode and 802.1Q mode. W hen select the 802.1Q VLAN mode, you need to
configuration the following settings.
802.1Q VLAN mode: configuration VLAN ID, Ingress Filter, and Acceptable
Frame Type.
VLAN ID Range: Type the PVID. The PVID will only assign to the Ingress
packets, not for all packets.