3 TXD | -----------TXD ---------- | > | 2 RxD |
| | | |
5 SGND | -----------SGND ---------- | 5 SGND |
| | | |
Cables
The RJ-45 ports on the switch support automatic MDI/MDI-X operation, so you can use standard straight-through twisted-pair cables to connect to any other network device (PCs, servers, switches, routers, or hubs). Please refer to the following table for cable specifications.
Cable Types and Specifications
| Cable | Type | Max. Length | Connector |
| | | | |
| 10BASE-T | Cat. 3, 4, 5100-ohm | UTP 100 m (328 ft) | RJ-45 |
| | | | |
| 100BASE-TX | Cat. 5 100-ohm UTP | 100 m (328 ft) | RJ-45 |
| | | | |
| 1000BASE-SX | 50/125 or 62.5/125 micron | 300/550m | LC |
| core multimode fiber (MMF) |
| | | |
| | | | |
| 1000Base-LX | 8.3/125 micron single mode | 10Km | LC |
| (SMF) |
| | | |
| | | | |
| | Cable specification table | |
100BASE-TX/10BASE-T Pin Assignments
With 100BASE-TX/10BASE-T cable, pins 1 and 2 are used for transmitting data, and pins 3 and 6 for receiving data.
RJ-45 Pin Assignments
169
