System Configuration
You can configure the STP system parameter after enable the STP function. You can
view spanning tree information about the Root Bridge on the left.
1.Select <Edit>
2.Priority (0~65535): assign path priority number.
3.Max Age (6~40): the maximum path age
4.Hello Time (1~10): the time that controls switch sends out the BPDU packet to check STP current status.
5.Forward Delay Time (4~30): forward delay time.
6.Select <Apply>.
STP System Configuration interface
Per Port Setting
1.Select <Edit>.
2.Path Cost: specifies the path cost of the port that switch uses to determine which port are the forwarding ports.
3.Priority: This is mean port priority; you can make it more or less likely to become the
90
