Administrator’s Guide - SoundPoint® IP / SoundStation® IPInstallation and Operation

Step:

Instructions:

 

 

6. Reboot phones after configuring their

Refer to 2.2.1 Basic Network Setup on page 5.

boot server through DHCP or statically.

To reboot phones, a menu option can be selected or a

 

 

key combination can be held down. The menu option

 

is called Restart Phone and it is in the Settings menu.

 

For the key combination, press and hold the following

 

keys simultaneously until a confirmation tone is heard

 

or for about three seconds:

 

IP 300 & IP 301: Volume-, Volume+, Hold and Do

 

Not Disturb

 

IP 430, 500 & IP 501: Volume-, Volume+, Hold, and

 

Messages

 

IP 600 & IP 601: Volume-, Volume+, Mute, and Mes-

 

sages

 

IP 4000: *, #, Volume+, and Select

 

Monitor the boot server event log and the uploaded

 

event log files (if permitted):

 

Ensure that the configuration process completed cor-

 

rectly.

 

Start making calls.

 

 

a.If the provisioning protocol requires an account name and password, the server account name and password must match those configured in the phones. Defaults are: provisioning protocol: FTP, name: PlcmSpIp, password: PlcmSpIp

2.2.2.2Local Phone Configuration

As the only method of modifying phone configuration or as a distributed method of augmenting a centralized provisioning model, a local phone-based configuration web server is available, unless it is disabled through sip.cfg. For more information, refer to

4.6.1.11Web Server <HTTPD/> on page 125. The phone’s local user interface also permits many application settings to be modified, such as SIP server address, ring type, or regional settings such as time/date format and language.

Local Web Server Access

Point your web browser to http://<phoneIPAddress>/.

 

Configuration pages are accessible from the menu along the top ban-

 

ner.

 

 

The web server will issue an authentication challenge to all pages

 

except for the home page.

 

Credentials are (case sensitive):

 

User Name: Polycom

 

Password: The administrator password is used for this.

 

 

 

22

Copyright © 2006 Polycom, Inc.

Page 30
Image 30
Polycom 1725-11530-200 Rev A1 manual Local Phone Configuration