Polycom 1725-11530-200 Rev A1 manual Copyright 2006 Polycom, Inc

Administrator’s Guide - SoundPoint IP / SoundStation® IP Optimization

4.6.2.4.2 Routing <routing/>

This configuration section allows specific routing paths for outgoing SIP calls to be configured independent of other ‘default’ configuration.

4.6.2.4.2.1 Server <server/>

Attribute	Permitted Values	Default	Interpretation
dialplan.x.rout-	dotted-decimal IP	Null	IP address or host name
ing.server.y.address	address or host name		and port of a SIP server
			that will be used for
dialplan.x.rout-	1 to 65535	5060
			routing calls. Multiple
ing.server.y.port
			servers can be listed
			starting with y=1, 2, ...
			for fault tolerance.

4.6.2.4.2.2 Emergency <emergency/>

In the following attributes, y is the index of the emergency entry description and z is the index of the server associated with the emergency entry y. For each emergency entry (index y), one or more server entry (indexes (y,z)) can be configured. y and z must both follow single step increasing numbering starting at 1.

Attribute	Permitted Values	Default	Interpretation
dialplan.x.routing.emer-	Comma separated list	Null	This represents the
gency.y.value	of entries or single	Example:	URLs that should be
	entry representing a or		watched for emergency
		“15,17,18”,
	a combination of SIP		routing.
		“911”, “sos”.
	URL.		When one of these
			defined URL is detected
			as being dialed by the
			user, the call will be
			automatically directed to
			the defined emergency
			server.
dialplan.x.routing.emer-	positive integer	Null	Index representing the
gency.y.server.z			server defined in
			4.6.2.4.2.1 Server
			<server/> on page 158
			that will be used for
			emergency routing.

158 Copyright © 2006 Polycom, Inc.