Polycom 1725-11530-200 Rev A1 manual Basic TCP/IP Tcpip, Network Monitoring netMon

Administrator’s Guide - SoundPoint® IP / SoundStation® IPOptimization

	Permitted
Attribute	Values	Default	Interpretation
qos.ip.callControl.precedence	0-7	5	If set to 1, set precedence bits
			in the IP TOS field of the IP
			header, or else don’t set them.

4.6.1.10 Basic TCP/IP <TCP_IP/>

4.6.1.10.1 Network Monitoring <netMon/>

Note

Polycom recommends that you do not change these values.

Attribute	Permitted Values	Default
tcpIpApp.netMon.enabled	0, 1	1
tcpIpApp.netMon.period	1 to 86400	30

4.6.1.10.2 Time Synchronization <SNTP/>

The following table describes the parameters used to set up time synchronization and daylight savings time. The defaults shown will enable daylight savings time (DST) for North America.

Daylight savings defaults:

•Do not use fixed day, use first or last day of week in the month.

•Start DST on the first Sunday in April at 2 am.

•Stop DST on the last Sunday in October at 2 am.

Attribute	Permitted	Default	Interpretation
	Values
tcpIpApp.sntp.resyncPeriod	positive	86400	Time in seconds
	integer	(24	between Simple Net-
		hours)	work Time Protocol
			(SNTP) re-syncs.
tcpIpApp.sntp.address	valid host	clock	Address of the SNTP
	name or IP		server.
	address

Copyright © 2006 Polycom, Inc. 121