Polycom 1725-11530-200 Rev A1 manual Web Server Httpd, Call Handling Configuration call

Administrator’s Guide - SoundPoint® IP / SoundStation® IP Optimization

4.6.1.11 Web Server <HTTPD/>

The phone contains a local web server for user and administrator features. This can be disabled for applications where it is not needed or where it poses a security threat. The web server supports both basic and digest authentication. The authentication user name and password are not configurable for this release.

Attribute	Permitted	Default	Interpretation
	Values
httpd.enabled	0, 1	1	If set to 1, the HTTP server will be enabled.

4.6.1.11.1 Configuration <cfg/>

Attribute	Permitted	Default	Interpretation
	Values
httpd.cfg.enabled	0, 1	1	If set to 1, the HTTP server configuration
			interface will be enabled.
httpd.cfg.port	1-65535	80	Port is 80 for HTTP servers. Care should be
			taken when choosing an alternate port.

4.6.1.12 Call Handling Configuration <call/>

	Permitted
Attribute	Values	Default	Interpretation
call.rejectBusyOnDnd	0, 1	1	If set to 1, reject all incoming calls with
			the reason “busy” if do-not-disturb is
			enabled.
call.enableOnNotRegistered	0, 1	1	If set to 1, calls will be allowed when the
			phone is not successfully registered, other-
			wise, calls will not be permitted without a
			valid registration.
call.offeringTimeOut	positive	60	Time in seconds to allow an incoming call
	integer		to ring before dropping the call, 0=infi-
			nitea.
call.ringBackTimeOut	positive	60	Time in seconds to allow an outgoing call
	integer		to remain in the ringback state before
			dropping the call, 0=infinite.

Copyright © 2006 Polycom, Inc. 125