Polycom 1725-11530-200 Rev A1 manual Specified 300 301, 430, Protocol, 600 4000

Administrator’s Guide - SoundPoint® IP / SoundStation® IP Installation and Operation

ports only the mentioned platforms. If an unsupported protocol is specified, this may result in a defined behavior, see the table below for details of which protocol the phone will use. The “Specified Protocol” listed in the table can be selected in the Server Type field or the Server Address can include a transfer protocol, for example http:// usr:pwd@server (refer to 2.2.1.3.3 Server Menu on page 11). The boot server address can be an IP address, domain string name, or URL. The boot server address can also be obtained through DHCP. Configuration file names in the <Ethernet address>.cfg file can include a transfer protocol, for example https://usr:pwd@server/dir/file.cfg. If a user name and password are specified as part of the server address or file name, they will be used only if the server supports them.

Note

A URL should contain forward slashes instead of back slashes and should not contain spaces. Escape characters are not supported. If a user name and password are not specified, the Server User and Server Password will be used (refer to 2.2.1.3.3 Server Menu on page 11).

	Protocol used by bootROM		Protocol used by SIP Application
Specified
	300, 500	301, 430, 501,	300, 500	301, 430, 501,
Protocol
		600, 601,		600, 601,
		4000		4000
FTP	FTP	FTP	FTP	FTP
TFTP	TFTP	TFTP	TFTP	TFTP
HTTP	FTP	HTTP	HTTP	HTTP
HTTPS	FTP	HTTP	Not supported. Trans-	HTTPS
			fers will fail.

For downloading the bootROM and application images to the phone, the secure HTTPS protocol is not available. To guarantee software integrity, the bootROM will only download cryptographically signed bootROM or application images. For HTTPS, widely recognized certificate authorities are trusted by the phone and custom certificates can be added (refer to 6.1 Trusted Certificate Authority List on page 173).

Copyright © 2006 Polycom, Inc. 7