Polycom 1725-11530-200 Rev A1 manual Figuration files or the local phone user interface should be

Administrator’s Guide - SoundPoint® IP / SoundStation® IP Features

tion. For more information, refer to 5.2.5 Bridged Line Appearance Signaling on page 172.

Important

Emergency routing is not supported on shared lines (refer to 4.6.1.2.2.2 Emergency <emergency/> on page 95).

Note

In the configuration files, bridged lines are configured by “shared line” parameters.

	Configuration file:	Specify whether diversion should be disabled on shared
	sip.cfg	lines.
		•	For more information, refer to 4.6.1.12 Call Handling
			Configuration <call/> on page 125.
	Configuration file:	Specify per-registration line type (private or shared) and
Central	phone1.cfg	the shared line third party name. A shared line will sub-
		scribe to a server providing call state information.
(boot
server)		•	For more information, refer to 4.6.2.1 Registration
			<reg/> on page 149.
		Specify per-registration whether diversion should be dis-
		abled on shared lines.
		•	For more information, refer to 4.6.2.3 Diversion
			<divert/> on page 154.
	Web Server	Specify per-registration line type (private or shared) and
	(if enabled)	third party name, and whether diversion should be dis-
		abled on shared lines. Navigate to:
		http://<phoneIPAddress>/reg.htm
		Changes are saved to local flash and backed up to <Ether-
		net address>-phone.cfg on the boot server. They will per-
Local		manently override global settings unless deleted through
		the Reset Local Confide menu selection.
	Local Phone User	Specify per-registration line type (private or shared) and
	Interface	the shared line third party name using the SIP Configura-
		tion menu. Either the Web Server or the boot server con-
		figuration files or the local phone user interface should be
		used to configure registrations, not a mixture of these
		options. When the SIP Configuration menu is used, it is
		assumed that all registrations use the same server.

46 Copyright © 2006 Polycom, Inc.