Polycom 1725-11530-200 Rev A1 manual Miscellaneous Administrative Tasks, Adding a Background Logo

Administrator’s Guide - SoundPoint® IP / SoundStation® IP Appendix 1

Verisign Class 4 Public Primary Certification Authority - G2

Verisign Class 4 Public Primary Certification Authority - G3

Verisign/RSA Commercial CA

Verisign/RSA Secure Server CA

6.2 Miscellaneous Administrative Tasks

6.2.1 Adding a Background Logo

This section provides instructions on how to add a background logo to all Sound- Point® IP phones in your organization. You must be running at least BootROM 2.x.x

and SIP 1.x.x. One bitmap file is required for each model, but SoundPoint® IP 301 phones do not support bitmap logos.

Model	Width	Height	Color Depth
IP 300/301	n/a	n/a	n/a
IP 430	94	23	monochrome
IP 500/501	114	51	4-bit grayscale or monochrome
IP 600/601	209	109	4-bit grayscale or monochrome
IP 4000	150	33	4-bit grayscale or monochrome

Logos smaller than described in the table above are acceptable, but larger logos may be truncated or interfere with other areas of the user interface.

The SoundPoint® IP 500/501/600/601 phones only support the four colors listed below. Any other colors will be approximated.

The SoundPoint® IP 4000 phone only supports black and white. Any other colors will be rendered as either black or white.

	RGB Values	RGB Values
Color	(Decimal)	(Hexadecimal)
Black	0,0,0	00,00,00
Dark Gray	96,96,96	60,60,60
Light Gray	160,160,160	A0,A0,A0
White	255,255,255	FF,FF,FF

Copyright © 2006 Polycom, Inc. 175