Polycom 1725-11530-200 Rev A1 manual Multiple Call Appearances

Administrator’s Guide - SoundPoint® IP / SoundStation® IPFeatures

	Web Server	Specify the number of line keys to assign per registration.
	(if enabled)	Navigate to:
		http://<phoneIPAddress>/reg.htm
		Changes are saved to local flash and backed up to <Ether-
		net address>-phone.cfg on the boot server. They will per-
		manently override global settings unless deleted through
Local		the Reset Local Config menu selection.
	Local Phone User	Specify the number of line keys to assign per registration
	Interface	using the SIP Configuration menu. Either the Web Server
		or the boot server configuration files or the local phone
		user interface should be used to configure registrations,
		not a mixture of these options. When the SIP Configura-
		tion menu is used, it is assumed that all registrations use
		the same server.

3.1.21 Multiple Call Appearances

The phone supports multiple concurrent calls. The hold feature can be used to pause activity on one call and switch to another call. The number of concurrent calls per line key is configurable. Each registration can have more than one line key assigned to it (refer to 3.1.20 Multiple Line Keys per Registration on page 41).

	Configuration file:	Specify the default number of calls that can be active or
	sip.cfg	on hold per line key.
		• For more information, refer to 4.6.1.12 Call Handling
Central		Configuration <call/> on page 125.
(boot	Configuration file:	Specify per-registration the number of calls that can be
server)
	phone1.cfg	active or on hold per line key assigned to that registration.
		This will override the default value specified in sip.cfg.
		• For more information, refer to 4.6.2.1 Registration
		<reg/> on page 149.

42 Copyright © 2006 Polycom, Inc.