Polycom 1725-11530-200 Rev A1 manual Indicators indicators, Attribute

Administrator’s Guide - SoundPoint IP / SoundStation® IP Optimization

SoundPoint® IP 500 and 501 phones and IP_600 parameters affect SoundPoint® IP 600 and 601 phones.

Attribute	Permitted Values	Interpretation
bitmap.x.y.name	The name of a bit-	This is the name of a bitmap to be used for creating an
	map to be used.	animation. If the bitmap is to be downloaded from the
		boot server, its name must:
		1.	Be different from any name already in use in
			sip.cfg.
		2.	Match the name of the corresponding <file-
			Name>.bmp to be retrieved from the boot server.

4.6.1.18 Indicators <indicators/>

Indicators (graphic icons, animations, and LED patterns) used by the phone are defined in this section.

Attribute	Permitted	Default	Interpretation
	Values
ind.idleDisplay.enabled	0, 1	0	If set to 1, the idle display may support pre-
			sentation of a custom animation if config-
			ured properly in the animation section of
			sip.cfg.

4.6.1.18.1Animations <Animations/> <IP_300/>, <IP_400/>, <IP_500/>, <IP_600/> and <IP_4000/>

This section defines bitmap animations composed of bitmap/duration couples. In the following table, x=IP_300, IP_400, IP_500, IP_600 or IP_4000, y is the animation number, z is the step in the animation. Note that IP_300 parameters affect SoundPoint® IP 300 and 301 phones, IP_400 parameters affect SoundPoint® IP 430 phones, IP_500 parameters affect SoundPoint® IP 500 and 501 phones and IP_600 parameters affect SoundPoint® IP 600 and 601 phones.

Attribute	Permitted Values	Interpretation
ind.anim.x.y.frame.z.bitmap	A bitmap name	Bitmap to use.
	defined previously.	Note that it must be defined already, refer
		to 4.6.1.17.1 Platform <IP_300/>,
		<IP_400/>, <IP_500/>, <IP_600/> and
		<IP_4000/> on page 133.

134 Copyright © 2006 Polycom, Inc.