Polycom 1725-11530-200 Rev A1 manual Messaging msg, Message Waiting Indicator mwi

Administrator’s Guide - SoundPoint® IP / SoundStation® IP Optimization

4.6.2.5 Messaging <msg/>

Message-waiting indication is supported on a per-registration basis.

	Permitted
Attribute	Values	Default	Interpretation
msg.bypassInstantMessage	0, 1	0	If set to 1, the display offering a choice
			of “Message Center” and “Instant Mes-
			sages” will be bypassed when pressing
			the Messages key. The phone will act as
			if “Message Center” was chosen. Refer
			to 3.6.1 Voice Mail Integration on
			page 64. Instant Messages will still be
			accessible from the Main Menu.

4.6.2.5.1 Message Waiting Indicator <mwi/>

In the following table, x is the registration number. IP 300, 301, and 430: x=1-2; IP

500 and 501: x=1-3; IP 600: x=1-6; IP 601: x=1-12; IP 4000: x=1.

Attribute	Permitted Values	Default	Interpretation
msg.mwi.x.sub-	ASCII encoded string con-	Null	If non-Null, the phone will
scribe	taining digits (the user part		send a SUBSCRIBE
	of a SIP URL) or a string		request to this contact after
	that constitutes a valid SIP		boot-up.
	URL (6416 or 6416@poly-
	com.com)
msg.mwi.x.call-	contact or	“disabled”	If set to “contact”, a call
BackMode	registration or		will be placed to the contact
	disabled		specified in the callback
			attribute when the user
			invokes message retrieval.
			If set to “registration”, a
			call will be placed using
			this registration to the con-
			tact registered (the phone
			will call itself).
			If set to “disabled”, mes-
			sage retrieval is disabled.
msg.mwi.x.callBack	ASCII encoded string con-	Null	Contact to call when
	taining digits (the user part		retrieving messages for this
	of a SIP URL) or a string		registration.
	that constitutes a valid SIP
	URL (6416 or 6416@poly-
	com.com)

Copyright © 2006 Polycom, Inc. 159