Polycom 1725-11530-200 Rev A1 manual Shared Calls shared, Default Interpretation Values

Administrator’s Guide - SoundPoint IP / SoundStation® IPOptimization

	Permitted
Attribute	Values	Default	Interpretation
call.lastCallReturnString	string of	*69	The string sent to the server when the user
	maximum		selects the “last call return” action.
	length 32
call.callsPerLineKey	1 to 24 OR	24 OR	For the SoundPoint® IP 600 and 601 the
	1 to 8	8	permitted range is 1 to 24 and the default
			is 24. For all other phones the permitted
			range is 1 to 8 and the default is 8.
			This is the number of calls that may be
			active or on hold per line key on the
			phone.
			Note that this may be overridden by the
			per-registration attribute of reg.x.callsPer-
			LineKey. Refer to 4.6.2.1 Registration
			<reg/> on page 149.
call.stickyAutoLineSeize	0 or 1	0	Set to 1 to make the phone use "sticky"
			line seize behavior. This will help with
			features that need a second call object to
			work with. The phone will attempt to ini-
			tiate a new outgoing call on the same SIP
			line that is currently in focus on the LCD
			(this was the behavior in SIP 1.6.5).
			Set to 0 means disabled (this was the
			behavior in SIP 1.6.6).
			Note: This may fail due to glare issues in
			which case the phone may select a differ-
			ent available line for the call.

a.The call diversion, no answer feature will take precedence over this feature if enabled. For more information, refer to 4.6.2.3.3 No Answer <noanswer/> on page 155.

4.6.1.12.1Shared Calls <shared/>

Attribute	Permitted	Default	Interpretation
	Values
call.shared.disableDiverta	0, 1	1	If set to 1, disable diversion feature for
			shared lines.
call.shared.seizeFailReorder	0, 1	1	If set to 1, play re-order tone locally on
			shared line seize failure.

126 Copyright © 2006 Polycom, Inc.