Polycom 1725-11530-200 Rev A1 manual Following sampled audio Wave file .wav formats are supported

Administrator’s Guide - SoundPoint® IP / SoundStation® IP Optimization

In the following table, x is the chord-set number and cat is one of callProg, ringer, or misc.

Attribute	Permitted	Interpretation
	Values
tone.chord.cat.x.freq.y	0-1600	Frequency for this component in Hertz; up to four
		chord-set components can be specified (y=1, 2, 3,
		4).
tone.chord.cat.x.level.y	-57 to 3	Level of this component in dBm0.
tone.chord.cat.x.onDur	positive	On duration in milliseconds, 0=infinite.
	integer
tone.chord.cat.x.offDur	positive	Off duration in milliseconds, 0=infinite.
	integer
tone.chord.cat.x.repeat	positive	Specifies how many times the ON/OFF cadence
	integer	is repeated, 0=infinite.

4.6.1.6 Sampled Audio for Sound Effects <sampled_audio/>

The following sampled audio WAVE file (.wav) formats are supported:

•mono 8 kHz G.711 μ-Law

•G.711 A-Law

•L16/160006 (16-bit, 16 kHz sampling rate, mono)

The phone uses built-in wave files for some sound effects. The built-in wave files can be replaced with files downloaded from the boot server or from the Internet, however, these are stored in volatile memory so the files will need to remain accessible should the phone need to be rebooted. Files will be truncated to a maximum size of 300 kilo- bytes.

6. L16/16000 is not supported on SoundPoint® IP 300, 301 and SoundStation® IP 4000 phones.

Copyright © 2006 Polycom, Inc. 101