Polycom 1725-11530-200 Rev A1 manual Sound Effects soundeffects, Patterns patterns

Administrator’s Guide - SoundPoint® IP / SoundStation® IP Optimization

4.6.1.7 Sound Effects <sound_effects/>

The phone uses both synthesized (based on the chord-sets described earlier) and sam- pled audio sound effects. Sound effects are defined by patterns: rudimentary sequences of chord-sets, silence periods, and wave files.

Attribute	Permitted	Default	Interpretation
	Values
se.stutterOnVoiceMail	0, 1	1	If set to 1, stuttered dial tone is used in place
			of normal dial tone to indicate that one or
			more messages (voice mail) are waiting at
			the message center.
se.appLocalEnabled	0, 1	1	If set to 1, local user interface sound effects
			such as confirmation/error tones, will be
			enabled.

4.6.1.7.1 Patterns <patterns/>

Patterns use a simple script language that allows different chord sets or wave files to be strung together with periods of silence. The script language uses the following instructions:

Instruction	Meaning	Example
sampled (n)	Play sampled audio	se.pat.callProg.x.inst.y.type =”sampled” (sampled audio
	file na	file instruction type)
		se.pat.callProg.x.inst.y.value =”3” (specifies sampled
		audio file 3)
chord (n, d)	Play chord set n (d is	se.pat.callProg.x.inst.y.type = “chord” (chord set
	optional and allows	instruction type)
	the chord set ON	se.pat.callProg.x.inst.y.value = “3” (specifies call
	duration to be over-
		progress chord set 3)
	ridden to d millisec-
		se.pat.callProg.x.inst.y.param = “2000” (override ON
	onds)
		duration of chord set to 2000 milliseconds)
silence (d)	Play silence for d	se.pat.callProg.x.inst.y.type = “silence” (silence instruc-
	milliseconds (Rx	tion type)
	audio is not muted)	se.pat.callProg.x.inst.y.value = “300” (specifies silence
		is to last 300 milliseconds)

Copyright © 2006 Polycom, Inc. 103