Polycom 1725-11530-200 Rev A1 manual Set the time and date display formats

Administrator’s Guide - SoundPoint® IP / SoundStation® IP Features

until a successful SNTP response is received to indicate that they are not accurate. The time and date display can use one of several different formats and can be turned off.

	Configuration file:	Turn time and date display on or off.
	sip.cfg	• For more information, refer to 4.6.1.4 User Prefer-
		ences <user_preferences/> on page 98.
Central		Set the time and date display formats.
		• For more information, refer to 4.6.1.3.2 Date and
(boot
server)		Time <datetime/> on page 97.
		Set the basic SNTP settings and daylight savings param-
		eters.
		• For more information, refer to 4.6.1.10.2 Time Syn-
		chronization <SNTP/> on page 121.
	Web Server	Set the basic SNTP and daylight savings settings.
	(if enabled)	Navigate to: http://<phoneIPAddress>/coreConf.htm#ti
		Changes are saved to local flash and backed up to
		<Ethernet address>-phone.cfg on the boot server. They
		will permanently override global settings unless deleted
		through the Reset Local Config menu selection.
	Local Phone User	The basic SNTP settings can be made in the Network
	Interface	Configuration menu.
Local		• For more information, refer to 2.2.1.1 DHCP or
		Manual TCP/IP Setup on page 5.
		The user can edit the time and date format and enable or
		disable the time and date display under the Settings
		menu.
		Changes are saved to local flash and backed up to
		<Ethernet address>-phone.cfg on the boot server. They
		will permanently override global settings unless deleted
		through the Reset Local Config menu selection.

50 Copyright © 2006 Polycom, Inc.