Pioneer DV-79AVi-s Setting up the remote to control your TV, Preset code list

03Controls and displays

Setting up the remote to control your TV

1 Input the manufacturer code.

While holding down the CLEAR button, input the two digit code from the table below that corresponds to the make of your TV.

For example, If you have a Pioneer TV, press and hold CLEAR, then press 0, 0 on the remote control.

2Confirm that the TV is responding to the programmed code.

On the remote, press the TV button. If the TV switches on (or into standby if it was on previously), then you have the correct code.

If nothing happens when you press the TV button, start again from step 1 using a different code.

•Some manufacturers have several codes. Try each one until you find the one that works.

Preset code list

Manufacturer	Preset Code
Pioneer	00, 34
RCA	01, 15, 16, 17, 18
Sharp	02, 19, 27
Zenith	03, 20
Sony	04
Toshiba	05, 26, 30
Hitachi	06, 24, 25, 31
Philips	07
Panasonic	08, 22
Mitsubishi	09
Goldstar	10, 23
GE	11, 28
Magnavox	12, 29
JVC	13, 32
Sanyo	14, 21
Fujitsu	33
Gradiente	35

30

En