Pioneer DV-79AVi-s operating instructions Getting Started Chapter, Switching on

Getting Started

Chapter 4

Getting Started

Switching on

After making sure that everything is connected properly and that the player is plugged in, press POWER to switch the player on.

Also, switch on your TV and make sure that it is set to the input you connected the DVD player to.

• You can also use the the STANDBY/ ON button on the remote control to switch the power on.

POWER

04

•If you connected this player to an AV receiver, make sure that the receiver is switched on and set to the correct input.

•This player features a screen saver. When on, If the player is stopped or paused and no button is pressed for five minutes, the screen saver starts. See Screen Saver on page 67 for how to switch it on.

• When the player is in standby, you can use the OPEN/CLOSE and (play) buttons to switch the player on and open the disc tray/start playing a loaded disc.

•My DVD player switches on but there is nothing displayed on my TV.

Make sure that the TV is set to the correct video input (not a TV channel). For example, if you connected this player to the VIDEO 1 inputs on your TV, switch your TV to VIDEO 1.

31

En