Switching between mono and stereo mode
The mono/stereo switch | allows you to switch between | ||
mono ( ) and stereo ( | ) mode, | depending | on the |
intercom system. |
|
|
|
Set the mono/stereo switch | to the | desired | |
position: mono ( ) or stereo ( | ). |
| |
Changing the left and right stereo channel |
| ||
The position “R” or “L” of the BOOM switch | corre- | ||
sponds to the position of the microphone on the left or right side of the mouth. When the microphone boom is rotated to permit left or right side microphone orienta- tion, the BOOM switch allows you to correctly assign the audio channels (L/R) to the appropriate headphone sides. This enables the correct orientation of the volume con- trols and any stereo audio signals. To move the BOOM switch, use a pointed tool.
Powering NoiseGard™ via two (rechargeable) batteries
Insert two 1.5 V AA alkaline batteries (IEC LR 6) or two 1.2 V AA rechargeable batteries (IEC LR 6). Observe correct polarity when inserting the batteries.
11
