Using the Macro/Normal Switch

The macro/normal switch located on the front of the phone allows you to take close-up shots. Slide the macro/normal switch to switch between Normal and Macro (close-up) modes. When you select Macro mode, the icon appears on the display.

Macro

Normal

Note: After using the camera for close-up shots (“Macro” mode), it is important to switch the camera back to the “Normal” setting.

Note: Placing the switch in between the macro and normal setting may result in out-of -focus images. For best results, slide the switch completely to one end or the other.

Setting the Flash

To activate the flash:

1.From camera mode, press Options (right softkey).

2.Highlight Flash and press .

3.Select an option from the following and press .

Off to deactivate the flash.

On This Shot to activate the flash for one shot.

On Always to activate the flash all the time.

Auto to activate the flash automatically.

4.Take a picture using the phone’s main LCD as a viewfinder.

Tip: When the phone is open and in camera mode, press to switch between flash modes.

Section 2L: Using Your Phone’s Built-in Camera

171

Page 185
Image 185
Sanyo MM-5600 manual Using the Macro/Normal Switch, Setting the Flash, To activate the flash