Sanyo MM-5600 manual Using the miniSD Card 144

8.Set the printer settings using your navigation key.

Picture to Print: You can select the picture from the In Camera folder or the miniSD. (You can select up to 99 pictures, however you can only select from one folder.)

Number of Copies: You can set the number of copies (1-10). (You cannot specify number of copies when Index Print is selected.)

Print Size: You can set the print size from Assigned by Printer, 4Óx6Ó, 8Óx10Ó, or Letter. (Print Size differs depending on the type of printer you have.)

Date Stamp: You can imprint the date on your pictures. Select On or Off. (Correct Date Stamp may not be placed depending on the type of printer you have.)

9.When you are finished selecting the printer settings, press Print (right softkey).

10. When finished printing, press or .

11.Select Yes and press . Follow the instructions on the display to unplug the USB cable from the phone.

Note: The Index Print mode lets you print out an index sheet of thumbnail pictures. You will only be able to print Exif JPEG files. Non-supported file formats on the miniSD card will be displayed as .

Note: While you are connected to the printer, your phoneÕs screen will display ÒPhone Off.Ó You cannot make or receive calls.

Note: Make sure your battery is fully charged before using the PictBridge.

PictBridge Error Messages: From time to time you may encounter printing problems. Any printer error messages will be displayed on your phone, informing you of the specific problems encountered. Please refer to the userÕs guide that came with your printer for descriptions, explanations, and possible resolutions for any error messages.

Section 2J: Using the miniSD Card 144