UsingYour Phone’s Battery and Charger

Battery Capacity

Your Sprint PCS Vision Phone is equipped with a Lithium Ion (LiIon) battery. It allows you to recharge your battery before it is fully drained. The battery provides up to 3.4 hours of continuous digital talk time (up to 1.9 hours in analog).

When the battery reaches 5% of its capacity, the low battery icon appears. When there are approximately five minutes of talk time left, the phone sounds an audible alert and then powers down.

Note: Long backlight settings, searching for service, vibrate mode, Sprint PCS Ready Link mode, and browser use affect the battery’s talk and standby times.

Tip: Be sure to watch your phone’s battery level indicator and charge the battery before it runs out of power.

Installingthe Battery

To install the LiIon battery:

1.Place the battery into the space beneath

the antenna with the metal contacts at the bottom, facing downward.

2. Gently press down until it’s in place and the battery release latch snaps.

Removingthe Battery

To remove your battery:

1.Make sure the power is off so that you

don’t lose any stored numbers or messages.

2. Push the battery release latch up and hold the battery.

3. Pull the battery up and out at a 45-degree angle.

Section 2A: Your Sprint PCS Vision Phone – The Basics

17

Page 31
Image 31
Sanyo MM-5600 manual UsingYour Phone’s Battery and Charger, Battery Capacity, Installingthe Battery, Removingthe Battery