Invacare Pro Series manual Installing Rigid Clothing Guards Figure, Arms, A R M S, Procedure

ARMS PROCEDURE 4

INSTALLING RIGID CLOTHING GUARDS (FIGURE 12)

1.Position the threaded and unthreaded half clamps on inside and outside of the wheelchair frame.

NOTE: Make sure the threaded half clamp is on the outside of the wheelchair frame.

2. Loosely install the washer and socket screw into

the unthreaded and threaded half clamps.

Unthreaded

Wheelchair Half Clamp

Frame

Socket Screw

Washer

Rigid

Clothing

A R M S

3. Determine the desired rigid clothing guard posi-

tion and securely tighten the two (2) half clamps

Guard

Slot

	together with the socket screw.
4.	Insert the rigid clothing guard into the slot on the
	threaded half clamp as shown in FIGURE 12.
5.	Repeat STEPS 1-4for the opposite rigid side
	guard.

Threaded Half Clamp

FIGURE 12 - INSTALLING RIGID CLOTHING

GUARDS

3 3