Casters Procedure, Pro-Sa | Invacare Pro Series specification

CASTERS	PROCEDURE 5

There are two (2) mounting positions for the caster headtubes on the fixed front frame.

Moving the caster headtubes towards the front of the wheelchair will increase the stability and maintain standard maneuverability of the wheelchair.

Moving the caster headtubes towards the rear of the wheelchair will increase the maneuverability and dis- tribute additional weight onto the rear wheels.

Procedure For Repositioning the Front Caster Headtubes

PRO-SA.

1.Determine the new mounting position of the caster headtubes.

2.Remove the two (2) hex screws, coved washers and locknuts that secure the caster headtube to the wheelchair frame.

NOTE: Observe the position of the adjustment cam for reinstallation.

3.Secure the caster headtube to the wheelchair frame in the new position with the existing two (2) hex screws, coved washers and locknuts.

NOTE: Make sure the coved washers are positioned between the hex screws and the caster headtube.

4.Repeat STEPS 1-3for the opposite side of the wheelchair.

NOTE: Make sure both casters are mounted in the same position.

5.Check the caster headtube angle. Refer to AD- JUSTING FRONT CASTER HEADTUBES in this procedure of the manual.

ALL PRO SERIES WHEELCHAIRS EXCEPT PRO-SA.

1. Loosen, but do not remove, the hex screw and

locknut that secure the caster headtube to the

Trailing

Position

Mounting on

Inside of

Wheelchair

Frame

Leading

Position

Hex Screws

Caster

Headtube

Locknuts

Coved Washers

Adjustment Cam

Coved Washers
Wheelchair Frame	Locknuts

Caster Headtube

Hex Screw, Do

C A S T E R S

headtube adjustment bracket.

Headtube

Not Remove

2. Remove the hex screw, counter sunk screw, two

(2) coved washers and locknuts that secure the

headtube adjustment bracket to the wheelchair

frame.

Adjustment

Bracket

Locknut, Do

Not Remove

Hex Screw	Counter Sunk
	Screw

FIGURE 5 - REPOSITIONING CASTER HEADTUBES ON WHEELCHAIR FRAME

3 7

Image 37

Invacare Pro Series Casters Procedure, Procedure For Repositioning the Front Caster Headtubes, Pro-Sa, Headtube Not Remove

Contents

Pro Pro-T Page Table of Contents Special Notes Special Notes Safety Summary Safety Summary Tire Pressure SAFETY/HANDLING of Wheelchairs Method Stairways Transferring to and from Percentage of Weight DistributionOther Seats REACHING, LEANING, Bending and Bending Forward Functional Reach from a WheelchairREACHING, Bending Backwards Specifications Specifications Safety Inspection Check List Safety Inspection Checklist Maintenance TroubleshootingMaintenance Safety Precautions TROUBLESHOOTING/MAINTENANCE Adjusting Footrest Height Figure INSTALLING/REMOVING Footrests FigureInstalling Adjustable Angle FLIP-UP Footplate Hinge Figure Procedure Footrest Installing Adjustable Angle Flip-up Footplate Footrest ProcedureAdjustable Angle Flip-up Footplate Depth Adjustment Flip the footplate hinge to the UP position Impact GUARDS/CALF Strap Figure Replacing Heel Loops FigureComposite Footplates Adjustable Footplate INSTALLING/REMOVING Elevating Legrests FigureAdjusting Calfpads Release Lever Calfpad Adjust Calfpad Secure Calfpad Saddle Bolts Footrest Installing Basketball Roller FigureCoved Washers Basketball Roller Locknuts Washers Basketball Roller Tube Replacing Seat Upholstery Figure Upholstery ProcedureBack Upholstery H O L S T E R Y Adjustable Tension Back Upholstery AdjustingInstalling Adjustable Tension Back Upholstery Figure Back canes Adjustable Tension Straps Replacing Adjustable Tension Back Upholstery FigureH O L S T Upholstery WHY USE Adjustable Tension Back Fabric Clothing Installing Fabric Clothing Guards FigureGuard Procedure Frame Adjusting Back Height FigureM E FOLDING/UNFOLDING Back Folding Back Wheelchairs only Figure Adjusting Back Angle Folding Back Wheelchairs only Figure Adjusting Rear Seat Height FigureFrame Procedure Back Canes With Push Handles Back Angle to Seat Rail Adjusting Half ARM Height Figure Installing Half ARM FigureArms Procedure Reinstall the washer and locknut onto the bottom hex screw INSTALLING/REMOVING the T-ARMS Figure Installing the T-ARM Sockets FigureProcedure Arms Installing Width Figure Adjusting the T-ARMSHeight Figure Depth Figure Arm Sockets Figure Reposition the arm tube on the T-arm postArm Clamp Arm Socket Bottom Socket Screws Replacing the Locking Lever T-ARMS Figure Adjusting Flip Back Arms Figure Installing Flip Back Arms FigureLength Height Guard Slot Installing Rigid Clothing Guards FigureThreaded Half Clamp INSTALLING/REPLACING Front Caster Forks Figure REPAIRING/REPLACING Pneumatic Caster TIRE/TUBEProcedure Casters S T E R S Pro-SA Model Wheelchairs Figure Adjusting Front Caster Headtubes Repositioning Caster Headtubes on Wheelchair Frame Figure Adjusting Caster Headtube Height Pro-SA Wheelchairs OnlyRepeat Steps 1-8for the opposite side of the wheel- chair ALL Pro Series Wheelchairs Except Pro-SA Figure Procedure For Repositioning the Front Caster Headtubes Casters ProcedurePRO-SA ALL PRO Series Wheelchairs Except PRO-SA Repeat Steps 1-4for the opposite side of the wheel- chair Installing QUICK-RELEASE Casters FigureSpacer Caster Headtube Fork Stem Locknut Bolt Front Caster Adjusting QUICK-RELEASE Axles Figure REMOVING/INSTALLING Rear Wheels FigureRear Wheels Procedure Adjusting QUAD-RELEASE Handles Figure Installing QUAD-RELEASE Axles FigureProcedure Rear Wheels And/or Out Adjusting Wheelbase Length Figure REPAIRING/REPLACING Pneumatic Rear Wheel TIRE/ TubeAdjusting Wheelbase Width Figure Removing the Play From the Rear Wheels Jam Nuts Axle Mounting Plate Axle Bushing Adjusting Rear Wheel Camber FigureWasher Coved Axle Washers Mounting Locknut Plate One Wheelchair Three 3 Camber Frame Washers Rear Wheelchair Centerline TOE-IN/TOE-OUT Alignment Figures 8Conditions exists Toe-out Toe-in Smaller Than Front Larger Than Front Correcting TOE-IN/TOE-OUT REPLACING/ADJUSTING the Wheel Lock FigureCondition Figure E E L S INSTALLING/ADJUSTING the ANTI-TIPPERS Figure Wheel Lock Extension Handle Installation FigureAdjusting the High/Undermount Wheel Lock Installing the Anti-tippers Adjust Adjusting the Anti-tipper HeightHeight Wheelchair Frame Anti-tipper Adjusting Handrims Spoke Rear Wheels Figure Installing/Replacing Handrims Spoke Rear Wheels FigureHandrims Phillips Screw Handrim Composite Rim Locknut Phillips Screw Rear Wheel HandrimLink Seat to Floor Height Determination Figures 1 Seat to Floor Procedure Positioning Caster Headtubes on the Wheelchair Frame Changing Seat to Floor HeightPositioning Front Caster on the Fork Rear Seat to Floor Heights Caster Headtube Front Seat to Floor Heights PRO-SA only Seat to FloorprocedurePage Warranty Limited WarrantyA N T Y One Invacare Way