PROCEDURE 2 | UPHOLSTERY |
|
|
U P H O L S T E R Y
NOTE: The back canes must be mounted in the same height adjustment hole.
5.Securely tighten the new/existing back upholstery to the back canes with the two (2) phillips screws and washers.
6.Secure the bottom of the new/existing back uphol- stery to the wheelchair frame with
Removing/Installing Optional Back
Upholstery - Back Canes Without Push
Handles (FIGURE 3)
REMOVING.
1.Unlatch the two (2) fastening flaps that secure the bottom of the existing back upholstery to the back canes.
2.Lift up on the top of the existing back upholstery to unlatch.
3.Lift up on the existing back upholstery and remove from the wheelchair.
4.Installthenew/existingbackupholsteryontothewheel- chair. Refer to the following procedure.
INSTALLING.
1.Position the new/existing back upholstery over the two
(2) back canes.
2.Securely latch the fastening flaps on the bottom of the new back upholstery to the back canes.
3.Adjust theNEW backupholsteryto the desired height. Refer to the following procedure.
Back Upholstery
Fastening
Flap
Fastening
Flap
Back
Canes
FIGURE 3 - BACK UPHOLSTERY -
REMOVING/INSTALLINGADJUSTING OPTIONAL BACK UPHOLSTERY - BACK CANES WITHOUT PUSH HANDLES
ADJUSTING.
1.Unfold the top of the back upholstery.
2.Adjust the back upholstery to the desired height.
3.Resecure the top of the back upholstery.
Adjustable Tension Back Upholstery
INSTALLING ADJUSTABLE TENSION BACK UPHOLSTERY (FIGURE 4).
1.Remove the existing back upholstery from the wheelchair. Refer to REMOVING/INSTALLING
OPTIONAL BACK UPHOLSTERY - BACK CANES WITH PUSH HANDLES, REMOVING/ INSTALLING OPTIONAL BACK UPHOLSTERY - BACK CANES WITHOUT PUSH HANDLES or
REPLACING ADJUSTABLE TENSION BACK UPHOLSTERY in this procedure of the manual.
2.Slide each section (anchor loop/adjuster strap) of the adjustable tension back upholstery onto the two
(2) back canes with the grommet hole facing the rear of the wheelchair.
3.Secure the adjustable tension back upholstery to the back canes with the mounting screws and washers.
NOTE: Clean the upholstery with warm water and mild detergent to remove superficial soil.
Fastening Strap
Back Upholstery Cover
Fastening Strap
Adjustable Tension
Back Upholstery
Frame
Anchor Loops
Adjuster
Straps
Mounting Screws
Washers Grommet Hole
FIGURE 4 - ADJUSTABLE TENSION BACK UPHOLSTERY - INSTALLING/REPLACING ADJUSTABLE TENSION BACK UPHOLSTERY
2 0
