Using Caller ID

Caller ID allows people to identify a caller before answering the phone by displaying the number of the incoming call. If you do not want your number displayed when you place a call, just follow these easy steps.

To block your phone number from being displayed for a specific outgoing call:

1.Press .

2.Enter the number you want to call.

3.Press .

To permanently block your number, call Sprint Customer Service.

Responding to Call Waiting

When youÕre on a call, Call Waiting alerts you of incoming calls by sounding one beep. Your phoneÕs screen informs you that another call is coming in and displays the callerÕs phone number. (This feature may not be available while you are in analog area.)

To respond to an incoming call while youÕre on a call:

Press (or press Options [right softkey], highlight Flash, and press ). (This puts the first caller on hold and answers the second call.)

To switch back to the first caller:

Press again (or press Options [right softkey], highlight Flash, and press ).

To respond to an incoming call when Answer on Hold is activated:

Press (or press Options [right softkey], highlight Flash, and press ).

(The Answer on Hold will be automatically deactivated. See page 23 for Answer on Hold.)

To switch back to the first caller:

Press again (or press Options [right softkey], highlight Flash and press ).

Tip: For those calls where you donÕt want to be interrupted, you can temporarily

disable Call Waiting by pressing before placing your call. Call Waiting is automatically reactivated once you end the call.

Section 3A: Sprint PCS Service Features Ð The Basics

225

Page 239
Image 239
Sanyo MM-5600 manual Using Caller ID, Responding to Call Waiting, To respond to an incoming call while youÕre on a call