Sanyo MM-5600 manual Displaying the Contacts List, Adding a New Contacts Entry, To add a new entry

Displaying the Contacts List

You can change the display view for the Contacts List. You may choose to display a List view (the default setting) or you may display the list with picture ID.

To display your contacts list:

Press the navigation key right.

– or –

1.Press to access the main menu.

2.Select Contacts and press .

3.Select Find/Add Entry and press .

To change the contacts display view:

1.Press the navigation key right.

2.Press Options (right softkey), then select Thumbnail or List and press to switch between Thumbnail/List’s display mode.

Adding a New Contacts Entry

Your Sprint PCS Vision Phone can store up to 500 phone numbers in up to 300 Contacts entries (an entry may contain up to seven numbers). Each entry’s name can contain sixteen characters.

To add a new entry:

1.Press the navigation key right to display the Contacts list.

2.Highlight <Add Contact> and press .

3.Enter a name and press .

4.Select the appropriate label, enter the phone number or address and press .

5.Press Save (left softkey).

– or –

1.Press the navigation key right to display the Contacts list.

2.Highlight an entry and press Options (right softkey).

3.Highlight Add Contact and press .

4.Follow steps 3-5 above.

Tip: You can also add a new Contacts entry by entering a number from standby mode. See “Saving a Phone Number” on page 28.

Section 2G: Using the Contacts Directory 87