Sanyo MM-5600 manual Answering a Roam Call With Call Guard Enabled, Setting Answer on Hold

The following options are also displayed by pressing Options (right softkey). To select an option, highlight it and press .

Call Guard to answer the call when you are in roaming mode. See page 75 for setting Call Guard.

Answer to answer the call.

Answer:Speaker to answer the call in speakerphone mode.

Answer on Hold to put the call on hold. (See ÒSetting Answer on HoldÓ below.)

Screen Call to answer the call by using a pre-recorded announcement. (Appears when you are in a Sprint PCS Service area or digital roaming area. See page 131 for the setting.)

Quiet Ringer to mute the ringer. (Appears when the ringer is set.)

Tip: Your Sprint PCS Phone offers additional ways to answer calls. (See page 56 for Auto Answer and see page 58 for Any Key Answer.)

Answering a Roam Call With Call Guard Enabled

Call Guard is an option that helps you manage your roaming charges when making or receiving calls while outside the Sprint Nationwide PCS Network. Please see Section 2D: Controlling Your Roaming Experience for more information about roaming.

To answer a call when you are roaming and Call Guard is enabled:

1.Press or .

2.Press to proceed while the pop-up message is displayed.

Note: When your phone is off, in an active Sprint PCS Vision Connection, or on a Sprint PCS Ready Link call, incoming calls go directly to voicemail.

Setting Answer on Hold

This feature allows you to hold an incoming call when you cannot answer immediately.

To set Answer on Hold:

1.When you receive an incoming call, press Options (right softkey).

2.Highlight Answer on Hold and press . (The caller hears a message to wait your answer. will display on the screen while the call is on hold.)

Section 2A: Your Sprint PCS Vision Phone Ð The Basics 23