Sanyo MM-5600 manual Using the Stereo Headset, To connect the stereo headset, To set headset mode

Using the Stereo Headset

Your phone comes with a stereo headset for hands free operation. Set the headset mode to Voice Call or Ready Link and press the Turbo Button (the operation button) on the headset to activate useful functions.

To connect the stereo headset:

Simply plug the headset into your phone’s headset jack.

To set headset mode:

1.Press to access the main menu.

2.Select Settings and press .

3.Select Others and press .

4.Select Headset Mode and press .

5.Select Turbo Button and press .

6.Select an option from the following and press .

Voice Calls: Press the Turbo Button to activate ASR (Automatic Speech Recognition). Press twice to redial the last call. Press and hold the button to record a Call Memo. (See page 116 for ASR.)

Ready Link: Press the Turbo Button to make a Ready Link call by using ASR (Automatic Speech Recognition). Press twice to redial the last Ready Link call. (See page 116 for ASR.)

Off: Turns this feature off.

To set the sound mode:

1.Follow steps 1-4 above.

2.Select Earpiece and press .

3.Select either Stereo or Mono and press .

Note: Use only the supplied stereo headset; Please make sure to insert the headset plug into the headset jack as far as it goes. Improper connection of the headset plug can cause abnormal sounds.

Note: When using the headset, DO NOT set the volume too high. Listening at high volume for an extensive period of time may cause hearing loss.

Section 2B: Controlling Your Phone’s Settings 60