Sanyo MM-5600 manual Connecting Your Phone toYour PC, To connect your phone to your PC

Connecting Your Phone toYour PC

Before using MM-5600’s mass storage capabilities, you need to prepare your device’s data services to synchronize with your desktop or laptop computer. Once the phone is connected to the PC, you can transfer your data in the miniSD card quickly and easily.

To connect your phone to your PC:

1.With the miniSD inserted, press to access the main menu. (Make sure your phone is fully charged.)

2.Select Tools/Extras and press .

3.Select USB Connection and press .

4.Select Mass Storage and press .

5.Select Yes and press .

6.Connect your phone to the PC by using the included USB cable. (Wait until the connection is completed.)

Once plugged into the USB port, the Mass Storage Device is detected by the host computer.

7.When you have finished, click on the USB device icon on your computer’s task bar and follow the instructions provided to safely unplug the USB cable. (The process may vary depending on the PC.)

Reminder: No driver installation is required for Windows 2000/ME/XP users. If you use Windows 98/98SE, you have to download and install the USB Mass Storage Driver from the Sprint Website at www.sprintpcs.com.

Note: To avoid loss of data, DO NOT remove the USB cable, the miniSD card or the battery while files are being accessed or transferred.

Note: DO NOT change or edit the folder/file name in the miniSD card via the computer or attempt to transfer large amounts of data from the computer to the miniSD card. It may result in miniSD card failure.

Note: DO NOT turn off, put into standby mode or restart your computer while using the Mass Storage Device. It will result in loss or damage of data.

Note: While you are connected to the computer, your phone’s screen will display “Phone Off.” You cannot make or receive calls.

Note: When you connect a Mass Storage device to a peripheral device, your device may not work properly.

Section 2J: Using the miniSD Card 145