Panasonic CS-MKE9NKU, CS-MKE7NKU Remote Controller, Temperature display, The temperature

REMOTE CONTROLLER

Transmitter

Sensor

	Display		(Cover closed)
	QUIET button	ON/OFF operation button
		1 HR. TIMER button
		Temperature setting buttons (TEMP.)
		MODE selector button
FAN SPEED selector button		NIGHT SETBACK button
	FLAP button	HIGH POWER button
ON TIME	Advance button	Advance button	OFF TIME
setting			setting
	Return button	Return button
buttons			buttons
		CLOCK button
	CANCEL button
	SENSOR button	Time display selector button
	ADDRESS switch	ACL button
		Temperature display
		selector button

		NOTE	The illustration above pictures the remote controller after the cover has been
			opened.
	Transmitter		When you press the buttons on the remote controller, the		mark appears in the
			display to transmit the setting changes to the receiver in the air conditioner.
		Sensor	A temperature sensor inside the remote controller senses the room temperature.
		Display	Information on the operating conditions is displayed while the remote controller is
			switched on. If the unit is turned off, FLAP setting and FAN SPEED setting are
			not displayed.
	QUIET button		: When you press this button, the fan rotates slower than the fan speed
			setting to provide a quieter operating sound.
	ON/OFF operation button		This button is for turning the air conditioner on and off.
	1 HR. TIMER button		: When you press this button, regardless of whether the unit is operating or
	(1-HOUR OFF TIMER)		stopping, the unit operates for one hour and then shuts down.
Temperature setting buttons			Press the	button to increase the set temperature.
		(TEMP.)	Press the	button to reduce the set temperature.
			The temperature	setting changes by 1 °C or 2 °F each time one of the TEMP.
			buttons is pressed.

8