Warning

If refrigerant gas blows off during the work, do not touch the refrigerant gas as it may cause frostbite.

 

 

Prohibit

If refrigerant gas leaks during the work, ventilate the room.

 

If refrigerant gas catches fire, harmful gas may be generated.

 

 

 

Do not mix any gas other than the specified refrigerant gas in the refrigerating cycle.

 

If air or other contaminants mix with the gas, pressure will become extremely high in the refrigerating cycle,

 

which may cause a unit breakdown."

Prohibit

 

 

When the welded section of the compressor intake or discharge pipe is to be disconnected, perform it in

 

a well-ventilated place after sufficiently recovering the refrigerant gas.

 

Any residue gas may jet out refrigerant or refrigerating machine oil, which may cause an injury.

 

 

 

When the work is to be performed in a high place (About 2 meters or more), make sure to wear a safety helmet,

 

gloves and safety belt. Insufficient safety gear may cause a serious injury in case of a fall.

 

 

 

When the unit is to be relocated, confirm that the new installation location has sufficient strength for the weight of the unit.

 

Insufficient strength of the installation location and incomplete installation work may cause an injury due to

 

the unit falling.

 

 

 

When the remote controller batteries are replaced, dispose of the old batteries out of the reach of children.

 

If a child swallows a battery, make sure that the child gets immediate medical attention.

 

 

 

Caution

Do not wash the air conditioner with water, as this may cause an electric shock or fire. Prohibit

For the repair work in places with high humidity or moisture, make sure to ground the unit.

Failure to do so may cause an electric shock.

Confirm that the component attachment position, wiring condition, soldering condition and connector connection are normal.

If not, it may cause overheating or fire.

Confirm that the temperature around the compressor is not too high, and then perform the repair work.

Failure to do so may cause a burn.

Perform welding work in a place with good ventilation.

If the work is performed in a poorly ventilated area, it might cause a lack of oxygen.

If the installation plate or attachment frame has deteriorated due to corrosion, etc., replace it.

Failure to do so may cause an injury due to the unit falling.

When the cleaning is to be performed, make sure to turn off the power and pull out the plug.

Touching the fan that is rotating at high speed may result in an injury.

When the indoor unit is to be removed, do not place it on an incline.

Doing so may cause wet furniture because water left inside may trickle down.

Prohibit

Do not hold the sharp end of the unit or the aluminum fins, as it may cause an injury to your hand or finger. Prohibit

After repairs, make sure to measure the insulation resistance and confirm that the value is 1 Mohm or more.

Any insulation error may cause an electric shock.

After repairs, make sure to check the drainage of the indoor unit.

Inappropriate drainage may cause wet furniture and floors due to water leakage.

3

Page 3
Image 3
Panasonic CS-MKE12NKU, CS-MKE9NKU, CS-MKE7NKU, CS-MKE18NKU, CS-MKE24NKU service manual Prohibit

CS-MKE24NKU, CS-MKE12NKU, CS-MKE18NKU, CS-MKE7NKU, CS-MKE9NKU specifications

The Panasonic CS-MKE series comprises a range of advanced air conditioning units designed to provide efficient cooling and heating solutions for both residential and commercial spaces. The models in this series include the CS-MKE18NKU, CS-MKE7NKU, CS-MKE12NKU, CS-MKE24NKU, and CS-MKE9NKU, each tailored to meet various needs while ensuring energy efficiency and user comfort.

One of the standout features of the CS-MKE series is its inverter technology. This innovative approach allows the air conditioner to adjust its compressor speed in accordance with the set temperature, leading to reduced energy consumption and lower utility bills. The inverter system operates smoothly, maintaining a consistent temperature without the bothersome on-off cycling typical of traditional units.

Moreover, the models in the CS-MKE range are equipped with the Plasma Quad Plus air purification technology. This feature effectively eliminates harmful particles and odors from the air, ensuring that the indoor environment is not only comfortable but also healthy. The air conditioning units can filter out dust, pollen, and various allergens, making them ideal for allergy sufferers or those with respiratory issues.

In terms of cooling and heating capacity, the CS-MKE series provides a versatile range. From the compact yet efficient CS-MKE7NKU, suitable for smaller rooms, to the robust CS-MKE24NKU designed for larger spaces, users can find an option that best suits their needs. Each model comes with adjustable airflow settings, allowing occupants to direct cool or warm air to where it's needed most, enhancing comfort levels.

The aesthetic design of the CS-MKE units is another appealing aspect. With their sleek and modern exterior, these air conditioners seamlessly blend into a variety of interior styles. Their ultra-quiet operation further enhances the user experience, making them suitable for bedrooms, offices, or any environment where noise reduction is a priority.

User-friendliness is a key characteristic of the CS-MKE series, boasting remote control features and programmable timers that allow users to set cooling or heating schedules, ensuring comfort upon arrival home while maximizing efficiency throughout the day.

Overall, the Panasonic CS-MKE series air conditioners, including models CS-MKE18NKU, CS-MKE7NKU, CS-MKE12NKU, CS-MKE24NKU, and CS-MKE9NKU, offer a blend of advanced technology, energy efficiency, and design sophistication, making them a commendable choice for any space.