NOTE
In the descriptions below, the following settings are used for the temperature and time indicator selector button on the bottom front section of the remote controller.
•Temperature: °F
•Time: AM, PM
(Example) To set to 10:30 pm.
| Operation | Indication |
|
|
|
1. | Press the CLOCK button once if | The time indication alone flashes. |
| the time indicator is not flashing. |
|
2. | Press the Advance, Return ( , | The time can be set in |
| ) button until PM 10:30 is | increments. Holding down the button |
| displayed. | advances the time rapidly in |
|
| increments. |
3. | Press the CLOCK button again. | This completes the setting of the |
|
| current time. |
|
|
|
2.How to set the OFF time (Example) To stop the air conditioner at 11:00 am.
| Operation |
| Indication |
|
|
|
|
1. | Press the OFF TIME setting | The timer | indication is displayed, |
| button once. | and the present OFF time is shown. | |
2. | Press the Advance, Return ( , | The timer | indication blinks. |
| ) button until AM 11:00 is | The time can be set in | |
| displayed. | increments. Holding down the button | |
|
| advances the time rapidly in | |
|
| increments. |
|
3. | Wait a few seconds, and then the | The timer | indication stops |
| setting is complete. | blinking and the present time is | |
|
| displayed. |
|
|
|
|
|
18